Versions this guide is based on:
| EVE Image Name | Downloaded Filename | Version | vCPUs | vRAM |
|---|---|---|---|---|
vwaas-200-6.2.3b |
Cisco-KVM-vWAAS-200-6.2.3c-b-63.tar.gz |
6.2.3b | 1 | 3072 |
vCM-100N-6.2.3c |
Cisco-KVM-vCM-100N-6.2.3c-b-63.tar.gz |
6.2.3b | 1 | 4096 |
Other versions should also be supported following bellow's procedure.
From EVE CLI, create tmp folder:
mkdir tmp
cd tmp
Upload the downloaded image to the EVE root/tmp folder using for example FileZilla or WinSCP. and from CLI uncompress it:
tar xzvf Cisco-KVM-vWAAS-200-6.2.3c-b-63.tar.gz
Create target image folder:
mkdir /opt/unetlab/addons/qemu/vwaas-200-6.2.3b
Copy image HDDs and rename it:
mv Disk-0.qcow2 /opt/unetlab/addons/qemu/vwaas-200-6.2.3b/virtioa.qcow2
mv Disk-1.qcow2 /opt/unetlab/addons/qemu/vwaas-200-6.2.3b/virtiob.qcow2
mv Disk-2.qcow2 /opt/unetlab/addons/qemu/vwaas-200-6.2.3b/virtioc.qcow2
Clean and fix permissions:
cd ..
rm -rf tmp
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
Same process is used for vCM following instruction above, dont forget user proper image and HDDs names