Complex Security Perimeter LAB by UD

Moderator: mike

Post Reply
Uldis (UD)
Posts: 1617
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Complex Security Perimeter LAB by UD

Post by Uldis (UD) » Sun Jul 30, 2017 6:24 pm

Enjoy another my masterpiece.
Complex Security Perimeter Lab.
Tasks you will find on lab topology

Images used for lab:
Windows 7 host for management and VPN
IOL L2 IRON 15.2
IOL L3 15.4.2T
ASA 8.4.2


UD
You do not have the required permissions to view the files attached to this post.

inwang
Posts: 2
Joined: Wed Aug 16, 2017 3:05 am

Re: Complex Security Perimeter LAB by UD

Post by inwang » Thu Aug 17, 2017 4:31 am

Thanks Uldis,
I am pretty new for this kind of tools but managed to install due to your team's good documents.
I imported this lab and have some issues.
I am using ASAv9.5.2 image though your lab using 8.4.2, VPN/SEC Zone FW is working but I don't know why Perimeter FW is not able to start, please let me know the reason... resource is enough.

And another one is I tried another lab, but failed to start SW but here I have no issue on SW as all booted already.
Can you let me know why it showed different result ?

Thanks in advance.
Jason

HI All,

I found that the image of Perimeter ASA is not ASAv, and I don't have this image,so I understood It is not started.
I unlock this lab and tried to edit this this Perimeter ASA to ASAv, just like the other ASAv is working, but I cannot change template, or image, or Icon to ASAv.
Please help me on this issue asap, how to change any particular node.

Thanks in advance.
Jason
You do not have the required permissions to view the files attached to this post.

Uldis (UD)
Posts: 1617
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Complex Security Perimeter LAB by UD

Post by Uldis (UD) » Fri Aug 18, 2017 8:21 am

you need ported asa image 8.4.2 or 9.1.5, because only these supports context active/active scenario
As well win7 host image is necessary

inwang
Posts: 2
Joined: Wed Aug 16, 2017 3:05 am

Re: Complex Security Perimeter LAB by UD

Post by inwang » Mon Sep 18, 2017 2:36 am

Thanks UD, Appreciated your reply.
I managed to work in this lab.
Can I have the final configuration of all the nodes ?
I thought there is only a few configuration on this lab, not the final configuration.
I will try to configure by myself, however I may not sure my configuration is correct or not.
So I seek your help of getting the final configuration of this lab and Remote Access Lab configuration as well.
My email-id is inwang@naver.com, please share to me.
thanks in advance.

Uldis (UD)
Posts: 1617
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Complex Security Perimeter LAB by UD

Post by Uldis (UD) » Mon Sep 18, 2017 10:16 pm

this lab was created from real case, and all configs contains real IP and passwords etc, that why no cfg provided and will not be.
Figure your self, like you have task to do it :)

rahul.borah
Posts: 4
Joined: Mon Jun 18, 2018 1:44 pm

Re: Complex Security Perimeter LAB by UD

Post by rahul.borah » Mon Aug 06, 2018 7:48 am

Hi UD,

Thanks for the excellent lab. But I have a little bit confusion regarding IP configuration on Internal perimeter zone and S2S VPN tunnel IPs.
Did you use the same IP and same VLAN on Internal perimeter zone devices (PerS1 and PerS2)?
And what is the S2S VPN peer IP address ? is 1 and 2 or 254 and 10 ?????

Thanks in advance
RB

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest