Redundant topology from SWITCH

Moderator: mike

Post Reply
utwo
Posts: 3
Joined: Wed Nov 14, 2018 7:00 am

Redundant topology from SWITCH

Post by utwo » Wed Nov 14, 2018 7:49 am

Hi, All,

I am trying to do my SWITCH lab - Challenge 1 Network Discovery.
In this lab we have redundant topology, and I can't ping from PC some of Management VLANs of SWs.

Is it normal? Bug?

Uldis (UD)
Posts: 1863
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Redundant topology from SWITCH

Post by Uldis (UD) » Wed Nov 14, 2018 9:24 am

you show topology please.
How we can know about what setup you talking about.
Upload topo picture, then I will answer

UD

utwo
Posts: 3
Joined: Wed Nov 14, 2018 7:00 am

Re: Redundant topology from SWITCH

Post by utwo » Thu Nov 15, 2018 4:32 am

Please find attached export file.

password: cisco

SW1 int VLAN1 -192.168.0.10
SW2 int VLAN1 -192.168.0.20
DSW1 int VLAN1 -192.168.0.30
DSW2 int VLAN1 -192.168.0.40

Code: Select all


PC1#ping 192.168.0.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
PC1#ping 192.168.0.20
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.20, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
PC1#ping 192.168.0.30
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.30, timeout is 2 seconds:
..!..
Success rate is 20 percent (1/5), round-trip min/avg/max = 6/6/6 ms
PC1#ping 192.168.0.30
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.30, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
PC1#ping 192.168.0.30
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.30, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
PC1#ping 192.168.0.40
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.40, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
PC1#
You do not have the required permissions to view the files attached to this post.

utwo
Posts: 3
Joined: Wed Nov 14, 2018 7:00 am

Re: Redundant topology from SWITCH

Post by utwo » Thu Nov 15, 2018 4:33 am

topology.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply