Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.
Moderator: mike
-
Fight_Doctor
- Posts: 3
- Joined: Tue Feb 04, 2025 8:27 pm
Post
by Fight_Doctor » Wed Jul 09, 2025 4:34 pm
My setup has the following specifications:
Dell PowerEdge R630
16 CPUs x Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
127.91 GB
ESXi-6.7.0-8169922-standard
EVE-NG ver 6.2
16 vCPUs
64GB
Installed the following Palo Alto images to my EVE-NG setup:
PA-VM-KVM-9.0.4.qcow2
PA-VM-KVM-11.0.0.qcow2
When adding a Palo Alto node to a project, I get the following error when trying to boot the PA node:
Booting 'PANOS (maint)'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_maint console=ttyS0,9600
n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2 altern
ate_root=/dev/nvme0n1p2
Error 2: Bad file or directory type
Press any key to continue...
Any help would be greatly appreciated.
Thanks.
-
rusty725
- Posts: 369
- Joined: Thu Mar 29, 2018 4:19 pm
Post
by rusty725 » Wed Jul 09, 2025 8:15 pm
try different qemu versions in the node settings.
-
Fight_Doctor
- Posts: 3
- Joined: Tue Feb 04, 2025 8:27 pm
Post
by Fight_Doctor » Thu Jul 10, 2025 1:03 pm
rusty725 wrote: ↑Wed Jul 09, 2025 8:15 pm
try different qemu versions in the node settings.
Tried all the different qemu versions, same result.