R1: Failed to start node (12). - IOL not working
Moderator: mike
-
- Posts: 1
- Joined: Sun Sep 24, 2017 4:07 pm
R1: Failed to start node (12). - IOL not working
Hi,
I'm new to IOL world, but I want to simulate some L2 devices.
On my ESXi host I imported the OVA file and ran through the wizard.
I've uploaded my IOL images (the supported onces), imported my key etc.
I than the NETMAP and tried to start my IOS image in my SSH terminal, without any problems my IOS was booting up.
But then I try accessing the WebGUI, importing a working IOS file and I press the "Start", I'm getting the "R1: Failed to start node (12)." error?
Second time I press the start, it says it sucessful, but icon isn't turning into the blue color, and I'm not able to access it through my Putty.
Whats wrong? How do I proceed? I've tried rebooting the machine and making sure VHV is enabled in my VMX file?
I'm new to IOL world, but I want to simulate some L2 devices.
On my ESXi host I imported the OVA file and ran through the wizard.
I've uploaded my IOL images (the supported onces), imported my key etc.
I than the NETMAP and tried to start my IOS image in my SSH terminal, without any problems my IOS was booting up.
But then I try accessing the WebGUI, importing a working IOS file and I press the "Start", I'm getting the "R1: Failed to start node (12)." error?
Second time I press the start, it says it sucessful, but icon isn't turning into the blue color, and I'm not able to access it through my Putty.
Whats wrong? How do I proceed? I've tried rebooting the machine and making sure VHV is enabled in my VMX file?
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
-
- Posts: 1
- Joined: Tue Oct 17, 2017 4:23 pm
Re: R1: Failed to start node (12). - IOL not working
Hi,
Let me post my problem here since I have same issue (failed to start node)...
eve-ng is running on my vmware workstation (4 CPU, 8GB RAM , 30GB HDD). I did touch NETMAP and when I run LD_LIBRARY_PATH the message shows "IOURC: Could not open iourc file ". I've attached screenshot. Kindly pls advise...
Thanks,
Bob
Let me post my problem here since I have same issue (failed to start node)...
eve-ng is running on my vmware workstation (4 CPU, 8GB RAM , 30GB HDD). I did touch NETMAP and when I run LD_LIBRARY_PATH the message shows "IOURC: Could not open iourc file ". I've attached screenshot. Kindly pls advise...
Thanks,
Bob
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7
- Joined: Fri Jun 02, 2017 9:26 pm
Re: R1: Failed to start node (12). - IOL not working
Did you create and add the license key to the iorc file?
From here: https://bsnetworking.blog/2017/01/22/ev ... ol-images/
From here: https://bsnetworking.blog/2017/01/22/ev ... ol-images/
Code: Select all
Add the following text to ~/.iourc:
[license]
eve-ng = 1234567890abcdef;
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: R1: Failed to start node (12). - IOL not working
But it exactly is answering you on output what is the issue.
iourc license is not working.
thats why IOL nodes won't start
UD
iourc license is not working.
thats why IOL nodes won't start
UD
-
- Posts: 7
- Joined: Fri Jun 02, 2017 9:26 pm
Re: R1: Failed to start node (12). - IOL not working
This is my first attempt to run IOL, ever.
I'm also having a problem starting IOL from the gui. I get the node started nessage and then nothing. From the cli:and the image starts and seems to run fine.
The server is bare metal running eve 2.0.3-84, 12G RAM, quad core i5, running Ubuntu 16.04Anyone able to help with this please?
I'm also having a problem starting IOL from the gui. I get the node started nessage and then nothing. From the cli:
Code: Select all
LD_LIBRARY_PATH=/opt/unetlab/addons/iol/lib /opt/unetlab/addons/iol/bin/L2-ADVENTERPRISE-M-15.1-20140814.bin 1
The server is bare metal running eve 2.0.3-84, 12G RAM, quad core i5, running Ubuntu 16.04
Code: Select all
root@eve1:~# uname -an
Linux eve1.mydomain.lan 4.9.40-eve-ng-ukms-2+ #4 SMP Fri Sep 15 02:07:02 CEST 2017 x86_64 x86_64 x86_64 GNU/Linux
-
- Posts: 135
- Joined: Wed Mar 15, 2017 3:30 pm
Re: R1: Failed to start node (12). - IOL not working
from your screenshot:
1. IOL images name are wrong.
2. license file should not end with .txt
1. IOL images name are wrong.
2. license file should not end with .txt
-
- Posts: 7
- Joined: Fri Jun 02, 2017 9:26 pm
Re: R1: Failed to start node (12). - IOL not working
Hi, sorry to bump this but is anyone able to help? Here's my system info:Thanks,
NTB
8o)
Code: Select all
***** EVE-NG INFORMATION TOOL - CREATED BY R! ******
Thu 19 Oct 15:03:37 BST 2017
***** EVE-NG VERSION INSTALLED *****
eve-ng 2.0.3-84
***** HOSTNAME INFORMATION *****
Static hostname: eve1.lothianbroadband.lan
Operating System: Ubuntu 16.04.3 LTS
Kernel: Linux 4.9.40-eve-ng-ukms-2+
Architecture: x86-64
***** FILE SYSTEM DISK SPACE USAGE *****
Filesystem Size Used Avail Use% Mounted on
udev 5.9G 0 5.9G 0% /dev
tmpfs 1.2G 18M 1.2G 2% /run
/dev/md0 442G 9.0G 411G 3% /
tmpfs 5.9G 0 5.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 5.9G 0 5.9G 0% /sys/fs/cgroup
/dev/sda1 188M 3.4M 184M 2% /boot/efi
tmpfs 1.2G 0 1.2G 0% /run/user/0
***** CPU INFORMATION *****
model name : Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
***** FREE AND USED MEMORY *****
total used free shared buff/cache available
Mem: 11G 412M 10G 28M 936M 10G
Swap: 16G 0B 16G
***** INTERFACE INFORMATION *****
pnet0 8000.bc305bdedf98 no eth0
pnet1 8000.00151720a408 no eth1
pnet2 8000.00151720a409 no eth2
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no
***** KVM CHECK INFORMATION *****
INFO: /dev/kvm exists
KVM acceleration can be used
***** APACHE STATUS *****
● apache2.service - LSB: Apache2 web server
Active: active (running) since Tue 2017-10-17 15:59:43 BST; 1 day 23h ago
***** CHECKING INERNET STATUS *****
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=24.4 ms
--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 24.422/24.422/24.422/0.000 ms
NTB
8o)
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: R1: Failed to start node (12). - IOL not working
NTB I dont understand what is the problem? if you cannot run IOL it license or image issue only....
visit our live support, and find me I will explain whats wrong...
http://www.eve-ng.net/index.php/live-helpdesk
visit our live support, and find me I will explain whats wrong...
http://www.eve-ng.net/index.php/live-helpdesk
-
- Posts: 7
- Joined: Fri Jun 02, 2017 9:26 pm
Re: R1: Failed to start node (12). - IOL not working
Hi, thanks for the reply.
I can start from the cli but not via the web gui:When I click start in the gui nothing happens
NTB
I can start from the cli but not via the web gui:
Code: Select all
root@eve1:~# cd /opt/unetlab/addons/iol/bin
root@eve1:/opt/unetlab/addons/iol/bin# touch NETMAP
root@eve1:/opt/unetlab/addons/iol/bin# LD_LIBRARY_PATH=/opt/unetlab/addons/iol/lib /opt/unetlab/addons/iol/bin/L2-ADVENTERPRISE-M-15.1-20140814.bin 1
***************************************************************
IOS On Unix - Cisco Systems confidential, internal use only
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, Solaris Software (I86BI_LINUXL2-ADVENTERPRISEK9-M), Experimental Version 15.1(20140814:053243) [mmen 112]
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 14-Aug-14 08:28 by mmen
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Linux Unix (Intel-x86) processor with 188803K bytes of memory.
Processor board ID 1
8 Ethernet interfaces
8 Serial interfaces
16K bytes of NVRAM.
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: no
Would you like to terminate autoinstall? [yes]:
NTB