Hi I am trying to setup EVE-NG at my work but no matter what I can 't get my lab nodes to connect to real network using cloud0 or cloud1
Setup:
VM installed from ISO running in Esxi 6.0 with two nics one for management and one for cloud1
When i use vpc to test and typing ip dhcp i only get D D D and no IP.
If i choose an IP all IP adresses are suddently used bu the same MAC address.
I have also configured promiscious mode to accept (see attachments)
https://www.eve-ng.net/forum/download/f ... ew&id=1268
https://www.eve-ng.net/forum/download/f ... ew&id=1269
I have tried both with ova and iso but no luck please help me.
Can't get my lab connected to the real network
Moderator: mike
-
- Posts: 3
- Joined: Mon Jul 03, 2017 2:53 pm
Can't get my lab connected to the real network
You do not have the required permissions to view the files attached to this post.
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: Can't get my lab connected to the real network
close lab, from main menu use system->stop all nodes and retry....
E.
E.
-
- Posts: 3
- Joined: Mon Jul 03, 2017 2:53 pm
Re: Can't get my lab connected to the real network
I have already tried that. No change.
It's the same problem on both my eve-ng vm's
It's the same problem on both my eve-ng vm's
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Can't get my lab connected to the real network
EVE Cookbook section 10
Find it in EVE Documentation
Find it in EVE Documentation