help getting Cisco 9K XR working

[dinesh2001]

Hello guys,

I'm trying to get an Cisco XR image working from: iosxrv-k9-demo-6.0.1.qcow2
Any suggestions on how to install this on the community version?
I'm getting errors below:


net0: 50:00:00:08:00:00 using virtio-net on 0000:00:03.0 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net0 50:00:00:08:00:00)................. No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

Booting from ROM...
iPXE (PCI 00:03.1) starting execution...ok
iPXE initialising devices...ok



iPXE 1.0.0+ (0600d) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net1: 50:00:00:08:00:01 using virtio-net on 0000:00:03.1 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net1 50:00:00:08:00:01)................. No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

Booting from ROM...
iPXE (PCI 00:03.2) starting execution...ok
iPXE initialising devices...ok



iPXE 1.0.0+ (0600d) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net2: 50:00:00:08:00:02 using virtio-net on 0000:00:03.2 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net2 50:00:00:08:00:02).... Operation canceled (http://ipxe.org/0b0
720a0)
No more network devices
ipxe.org
iPXE - open source boot firmware [err:040ee1]
ipxe.org
iPXE - open source boot firmware [start]
ipxe.org
iPXE - open source boot firmware [err:040ee1]
ipxe.org
iPXE - open source boot firmware [start]
ipxe.org
iPXE - open source boot firmware [0b0]

[Uldis (UD)]

We are advicing use ISO image to install and prepare XRv9K image
not that one you got from....

ISO installed XRv9K works perfect..
NOTE: XRv9K image require x4 CPU and 16GB ram for single node !!!

https://www.eve-ng.net/index.php/docume ... -xrv-9000/