vmanage 18.4.4 stops after starting [SOLVED]

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

vmanage 18.4.4 stops after starting [SOLVED]

Post by informramki » Mon May 04, 2020 7:48 pm

Hi:

vmanage version 18.4.4 stops itself after starting.

I followed the how to and expanded the virtual disk via a video as well
saw a similar post and corrected any mistake
still i am not able bring vmanage up.

any help is appreciated
You do not have the required permissions to view the files attached to this post.

sven
Posts: 17
Joined: Wed Nov 15, 2017 8:44 am

Re: vmanage 18.4.4 stops after starting

Post by sven » Tue May 05, 2020 11:07 am

Hi,

which version of eve-ng are you running?
what brand of cpu do you have?
do you have VT-X enabled?

What is the error that you see? Where do you see it?

Thanks.

Uldis (UD)
Posts: 5081
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: vmanage 18.4.4 stops after starting

Post by Uldis (UD) » Wed May 06, 2020 7:23 am

vManage must have second hrr drive,
Please follow exactly how to prepare it:
https://www.eve-ng.net/index.php/docume ... mages-set/

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

Re: vmanage 18.4.4 stops after starting

Post by informramki » Fri May 08, 2020 5:20 am

I am not sure what is wrong or what wrong I am doing. I tried multiple times with 18.4.4 and 19.2.2 (followed the same procedure in how to ) I even saw the video to expand the HDD.

Details: EVE-NG Community:
Hosted on vmware fushion on my mac OS (Sierra)
Both my vManage versions 18.4.4 and 19.2.2 (I changed the RAM in the edit to 24G as per the how to for 19.2.2) , 18.4.4 all defaults [4 16384 2]

The vManage node wont start, it will start and then stops by itself after say 2 to 3 secs.


root@eve-ng:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 796M 18M 778M 3% /run
/dev/mapper/eve--ng--vg-root 533G 3.7G 508G 1% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 472M 88M 360M 20% /boot
root@eve-ng:~#

root@eve-ng:/opt/unetlab/addons/qemu/vtmgmt-19.2.2# ls -lrt
total 1076744
-rw-r--r-- 1 root root 1102381056 May 8 07:32 hda.qcow2
-rw-r--r-- 1 root root 198656 May 8 07:35 hdb.qcow2
root@eve-ng:/opt/unetlab/addons/qemu/vtmgmt-19.2.2#

1. Downloaded image and created the folder as per the how to (/opt/unetlab/addons/qemu/vtmgmt-19.2.2), since I am tried 19.2.2 now.
2. Copied the image using filezila to the above path, mv to make it hda.qcow2
3. created HDD using the command named it hdb.qcow2 for 100G
3. gave the permissions using the command.
4. Launched in the GUI. changed the RAM in the edit to 24.5G (24500) or 24000 also tried

it will start and stop in 2 to 3 secs, wiped it and tried again no luck.

Any help is highly appreciated. I have been in this state for a week.
You do not have the required permissions to view the files attached to this post.

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

Re: vmanage 18.4.4 stops after starting

Post by informramki » Fri May 08, 2020 5:36 am

Disk one and Disk 2 both 500G and saw this video:

https://www.eve-ng.net/index.php/docume ... on-eve-vm/

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

Re: vmanage 18.4.4 stops after starting

Post by informramki » Fri May 08, 2020 6:22 am

Not Sierra, Mohave

Uldis (UD)
Posts: 5081
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: vmanage 18.4.4 stops after starting

Post by Uldis (UD) » Fri May 08, 2020 8:16 am

check simple thing on your eve cli command:

kvm-ok

if intel vt-x/ept is enabled

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

Re: vmanage 18.4.4 stops after starting

Post by informramki » Fri May 08, 2020 6:47 pm

I think its enabled. I see this in my eve-ng

root@eve-ng:~# kvm-ok
INFO: /dev/kvm exists
KVM acceleration can be used
root@eve-ng:~#

I am assuming its enabled. I again reinstalled the eve-ng and made sure that i had checked that check box, by default it was checked.
Screen Shot 2020-05-08 at 9.35.46 AM.png
You do not have the required permissions to view the files attached to this post.

Uldis (UD)
Posts: 5081
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: vmanage 18.4.4 stops after starting

Post by Uldis (UD) » Sat May 09, 2020 12:00 am

Look better come to eve live chat, and this problem we can solve remotely..
Iam more than sure that problem is in your image...
as well need check other settings of your eve...
https://www.eve-ng.net/index.php/live-helpdesk/
use gmail to join

Uldis

informramki
Posts: 11
Joined: Tue Apr 28, 2020 8:03 am

Re: vmanage 18.4.4 stops after starting

Post by informramki » Mon May 11, 2020 6:06 am

Can you let me know what time you will be in the live chat so that I can try coming at the same time? I am in US, PST

Post Reply