Hello.
We have installed EVE-NG Pro on an ESXi host connected to a LAN switch with 2x 10G NICs.
The ESXi vDS has the following default load blanacing configuration: "Route based on the originating virtual port".
We get a traffic loop with this setup, when broadcast packets like "DHCP Discover" leave the EVE-NG VM into the LAN to reach out to the DHCP server.
Could you please help me, how we have to configure the ESXi host connections to the LAN switch to avoid this loop situation.
Thank you very much,
Karl
How to connect an ESXi host with dual NICs to switch to avoid loops with EVE-NG
Moderator: mike
-
- Posts: 9
- Joined: Thu Aug 13, 2020 1:08 pm
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: How to connect an ESXi host with dual NICs to switch to avoid loops with EVE-NG
Check this mate
I made tests a lot with VDS
these are 2 pages from new EVE Pro cookbook about VDS setup
I made tests a lot with VDS
these are 2 pages from new EVE Pro cookbook about VDS setup
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: How to connect an ESXi host with dual NICs to switch to avoid loops with EVE-NG
Also you can come to discuss about it in our live EVE chat
https://www.eve-ng.net/index.php/live-helpdesk/
use your gmail to join or create new chat account with own email.
our experts are on duty in there
My chat name @EVE-NG-UD
https://www.eve-ng.net/index.php/live-helpdesk/
use your gmail to join or create new chat account with own email.
our experts are on duty in there
My chat name @EVE-NG-UD