Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.
Moderator: mike
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Sun Mar 18, 2018 5:26 pm
Good day,
I have ESXi 6.5.0 server with eve-ng on it.
ESXi
Code: Select all
Version: 1.8.0
Build number: 4516221
ESXi version: 6.5.0
ESXi build number: 4887370
Eve-ng
Code: Select all
root@eve-ng:~# dpkg -l eve-ng
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==============-============-============-=================================
ii eve-ng 2.0.3-86 amd64 A new generation software for net
root@eve-ng:~#
I have the lab with two connected via bridge Juniper vMX with profile in attachment
They cannot ping each other but they are able to ping IP on the corresponding bridge of EVE-NG VM.
I tried em1000/tpl network emulation and different network interfaces (em2/ge-0/0/0), it didn't help me.
I see arp in arp tables and drops on the bridge vnet0_1
root@eve-ng:~# ifconfig vnet0_1
vnet0_1 Link encap:Ethernet HWaddr 96:51:74:0e:bd:a3
inet addr:192.168.1.3 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1
RX packets:955 errors:0 dropped:337 overruns:0 frame:0
TX packets:569 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:99582 (99.5 KB) TX bytes:53410 (53.4 KB)
What should I do to fix it?
Thank you.
Code: Select all
Model: vmx
Junos: 14.1R1.10
JUNOS Base OS Software Suite [14.1R1.10]
JUNOS Base OS boot [14.1R1.10]
JUNOS Crypto Software Suite [14.1R1.10]
JUNOS Online Documentation [14.1R1.10]
JUNOS Kernel Software Suite [14.1R1.10]
JUNOS Packet Forwarding Engine Support (M320) [14.1R1.10]
JUNOS Packet Forwarding Engine Support (M/T/EX Common) [14.1R1.10]
JUNOS Routing Software Suite [14.1R1.10]
JUNOS Runtime Software Suite [14.1R1.10]
JUNOS Services AACL PIC package [14.1R1.10]
JUNOS Services Application Level Gateway [14.1R1.10]
JUNOS Services Application Level Gateway (xlp64) [14.1R1.10]
JUNOS Services Application Level Gateway (xlr64) [14.1R1.10]
JUNOS AppId Services PIC Package [14.1R1.10]
JUNOS Services AppId PIC package (xlr64) [14.1R1.10]
JUNOS Border Gateway Function PIC package [14.1R1.10]
JUNOS Services Captive Portal and Content Delivery PIC package [14.1R1.10]
JUNOS Services HTTP Content Management PIC package [14.1R1.10]
JUNOS Services HTTP Content Management PIC package (xlr64) [14.1R1.10]
JUNOS IDP Services PIC Package [14.1R1.10]
JUNOS Packet Forwarding Engine Trio Simulation Package [14.1R1.10]
Juniper configs
Code: Select all
interfaces {
inactive: ge-0/0/0 {
mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/30;
}
}
}
ge-0/0/1 {
mac 50:00:00:02:00:03;
unit 0 {
family inet {
address 192.168.1.2/24;
}
}
}
em2 {
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
}
protocols {
lldp {
interface all;
}
}
You do not have the required permissions to view the files attached to this post.
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Sun Mar 18, 2018 6:46 pm
Code: Select all
root@eve-ng:~# ./evenginfo.sh
***** EVE-NG INFORMATION TOOL - CREATED BY R! ******
Sun Mar 18 20:44:54 EET 2018
***** EVE-NG VERSION INSTALLED *****
eve-ng 2.0.3-86
***** HOSTNAME INFORMATION *****
Static hostname: eve-ng
Virtualization: vmware
Operating System: Ubuntu 16.04.4 LTS
Kernel: Linux 4.9.40-eve-ng-ukms-2+
Architecture: x86-64
***** FILE SYSTEM DISK SPACE USAGE *****
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 799M 19M 781M 3% /run
/dev/mapper/eve--ng--vg-root 97G 13G 81G 14% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 472M 83M 365M 19% /boot
***** CPU INFORMATION *****
model name : Intel(R) Xeon(R) CPU E5507 @ 2.27GHz
***** FREE AND USED MEMORY *****
total used free shared buff/cache available
Mem: 7.8G 381M 7.1G 26M 355M 7.1G
Swap: 979M 0B 979M
***** INTERFACE INFORMATION *****
pnet0 8000.000c29efbc30 no eth0
pnet1 8000.000000000000 no
pnet2 8000.000000000000 no
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no
***** KVM CHECK INFORMATION *****
INFO: /dev/kvm exists
KVM acceleration can be used
***** APACHE STATUS *****
* apache2.service - LSB: Apache2 web server
Active: active (running) since Sun 2018-03-18 20:28:19 EET; 16min ago
***** CHECKING INERNET STATUS *****
PING www.google.com (173.194.73.104) 56(84) bytes of data.
64 bytes from lq-in-f104.1e100.net (173.194.73.104): icmp_seq=1 ttl=50 time=93.6 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 93.664/93.664/93.664/0.000 ms
***** COPY or SCREENSHOT THIS INFORMATION FOR EVE SUPPORT TO HELP/UNDERSTAND YO UR SYSTEM INFORMATION.******
***** http://www.eve-ng.net/forum/ ******
-
Uldis (UD)
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Sun Mar 18, 2018 7:48 pm
if you want connect lab node to EVE, you have to use cloud interface...
here in my setup vMX is connected to Mgmt/cloud0
and have internet on it.
UD
You do not have the required permissions to view the files attached to this post.
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Mon Mar 19, 2018 5:01 pm
I do not need to connect the VMXs to my LAN, I just want to connect them to each other.
Well, I'll try a different type of network, thank you
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Mon Mar 19, 2018 6:22 pm
I tried different netrwork types (cloud, mgm, bridge) in the lab, different network cards on the host system (em1000) but nothing could help me.
I have unetlab 1.0.0-6 on the same esxi, two junipers in the VM in Unetlab pings each other.
If I set up IP from the ge-0/0/0 network on the bridge in EVE, I can see both of the juns.
I have the following configs of the juniper and bridge in VM:
MX1
Code: Select all
root@mx1# show interfaces ge-0/0/0
mac 50:00:00:01:00:02;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
[edit]
root@mx1#
[edit]
root@mx1# run ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2): 56 data bytes
^C
--- 10.0.0.2 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
[edit]
root@mx1#
MX2
Code: Select all
[edit]
root@mx2# show interfaces ge-0/0/0
mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
[edit]
root@mx2#
EVE-NG
Code: Select all
root@eve-ng:~# ip addr show dev pnet1
4: pnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP group default qlen 1000
link/ether 3a:d0:bf:c9:26:f9 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.3/24 scope global pnet1
valid_lft forever preferred_lft forever
inet6 fe80::545e:b0ff:fe06:7b26/64 scope link
valid_lft forever preferred_lft forever
root@eve-ng:~# ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=1.74 ms
^C
--- 10.0.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.741/1.741/1.741/0.000 ms
root@eve-ng:~# ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.62 ms
^C
--- 10.0.0.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.622/1.622/1.622/0.000 ms
root@eve-ng:~# brctl showmacs pnet1
port no mac addr is local? ageing timer
1 00:05:86:71:19:00 no 18.09
2 00:05:86:71:89:00 no 6.06
2 3a:d0:bf:c9:26:f9 yes 0.00
2 3a:d0:bf:c9:26:f9 yes 0.00
2 50:00:00:01:00:02 no 2.80
1 50:00:00:02:00:02 no 1.26
1 f6:f9:5c:f3:71:22 yes 0.00
1 f6:f9:5c:f3:71:22 yes 0.00
root@eve-ng:~#
-
Uldis (UD)
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Mon Mar 19, 2018 8:11 pm
to interconnect nodes no need add any bridge on topology
straight connection...
you MUST not touch EVE pnet interfaces at all please..
check this video how to interconnect nodes in eve
Video 8
http://www.eve-ng.net/index.php/documentation/howto-s-2
UD
You do not have the required permissions to view the files attached to this post.
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Tue Mar 20, 2018 7:45 am
Ok, thank you.
I'll try a straight link between two junipers, but what about a bridge?
Why doesn't it foraward packets between nodes although the bridge sees both of hosts?
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Tue Mar 20, 2018 5:08 pm
I changed to direct link between junipers but it did't help me so I have got the same issue.
I see arp in the cache, lldp neighbor but can't ping another jun.
What should I do to fix the problem?
Code: Select all
root@mx1> ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2): 56 data bytes
^C
--- 10.0.0.2 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
root@mx1> show configuration interfaces ge-0/0/0
mac 50:00:00:01:00:02;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
root@mx1> show interfaces ge-0/0/0
Physical interface: ge-0/0/0, Enabled, Physical link is Up
Interface index: 137, SNMP ifIndex: 513
Link-level type: Ethernet, MTU: 1514, MRU: 1522, Speed: 1000mbps,
BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
Source filtering: Disabled, Flow control: Enabled
Pad to minimum frame size: Disabled
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Link flags : None
CoS queues : 8 supported, 8 maximum usable queues
Current address: 50:00:00:01:00:02, Hardware address: 00:05:86:71:f7:00
Last flapped : 2018-03-20 16:50:58 UTC (00:11:55 ago)
Input rate : 64 bps (0 pps)
Output rate : 232 bps (0 pps)
Active alarms : None
Active defects : None
Interface transmit statistics: Disabled
Logical interface ge-0/0/0.0 (Index 329) (SNMP ifIndex 523)
Flags: Up SNMP-Traps 0x4004000 Encapsulation: ENET2
Input packets : 28
Output packets: 51
Protocol inet, MTU: 1500
Flags: Sendbcast-pkt-to-re, Is-Primary
Addresses, Flags: Is-Default Is-Preferred Is-Primary
Destination: 10.0.0/24, Local: 10.0.0.1, Broadcast: 10.0.0.255
Protocol multiservice, MTU: Unlimited
Flags: Is-Primary
root@mx1>
root@mx1>
root@mx1> show arp
MAC Address Address Name Interface Flags
50:00:00:02:00:02 10.0.0.2 10.0.0.2 ge-0/0/0.0 none
root@mx1>
Code: Select all
root@mx2> show configuration
## Last commit: 2018-03-19 18:11:49 UTC by root
version 14.1R1.10;
system {
host-name mx2;
root-authentication {
encrypted-password "$1$nYRh9iTU$n1gJPeZ1PTkNd5ChfeWze."; ## SECRET-DATA
}
services {
telnet;
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
interfaces {
ge-0/0/0 {
mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
}
protocols {
lldp {
interface all;
}
}
root@mx2> show interfaces em2
Physical interface: em2, Enabled, Physical link is Up
Interface index: 67, SNMP ifIndex: 116
Type: Ethernet, Link-level type: Ethernet, MTU: 2000
Device flags : Present Running
Interface flags: Promiscuous SNMP-Traps
Link flags : None
Current address: 50:00:00:02:00:02, Hardware address: 50:00:00:02:00:02
Last flapped : Never
Input packets : 32
Output packets: 26
root@mx2> ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
^C
--- 10.0.0.1 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
root@mx2> show lldp neighbors
Local Interface Parent Interface Chassis Id Port info System Name
ge-0/0/0 - 00:05:86:71:fa:c0 513 mx1
-
Uldis (UD)
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Tue Mar 20, 2018 7:27 pm
it is your image issue only.
Straight link between routers IS a bridge link !!!
get image vmx-14.1R4.8-domestic
its the best from 14 vMX series
-
shvlad1
- Posts: 8
- Joined: Sun Mar 18, 2018 4:46 pm
Post
by shvlad1 » Wed Mar 21, 2018 5:47 pm
with vmx-14.1R4.8-domestic i got the same problem
I got next error, what does it mean?
Thank you
em2error setting host MAC filter table
em2error setting host MAC filter table
Code: Select all
root# show
## Last changed: 2018-03-21 17:40:16 UTC
version 14.1R4.8;
system {
root-authentication {
encrypted-password "$1$mSzBAjtK$3xI2.zoo4ubgCiB9wbBlI/"; ## SECRET-DATA
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
interfaces {
inactive: ge-0/0/0 {
mac 50:00:00:01:00:02;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
em2 {
inactive: mac 50:00:00:01:00:02;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
[edit]
root# commit
em2error setting host MAC filter table
em2error setting host MAC filter table
commit complete
[edit]
root# run show route
inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/24 *[Direct/0] 00:00:04
> via em2.0
10.0.0.1/32 *[Local/0] 00:00:04
Local via em2.0
[edit]
root# run ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2): 56 data bytes
^C
--- 10.0.0.2 ping statistics ---
15 packets transmitted, 0 packets received, 100% packet loss
[edit]
root# run show arp
MAC Address Address Name Interface Flags
50:00:00:02:00:02 10.0.0.2 10.0.0.2 em2.0 none
[edit]
root# run show version
Model: vmx
Junos: 14.1R4.8
JUNOS Base OS Software Suite [14.1R4.8]
JUNOS Base OS boot [14.1R4.8]
JUNOS Crypto Software Suite [14.1R4.8]
JUNOS Online Documentation [14.1R4.8]
JUNOS Kernel Software Suite [14.1R4.8]
JUNOS Routing Software Suite [14.1R4.8]
JUNOS Runtime Software Suite [14.1R4.8]
JUNOS Services AACL PIC package [14.1R4.8]
JUNOS Services Application Level Gateway [14.1R4.8]
JUNOS Services Application Level Gateway (xlp64) [14.1R4.8]
JUNOS Services Application Level Gateway (xlr64) [14.1R4.8]
JUNOS AppId Services PIC Package [14.1R4.8]
JUNOS Services AppId PIC package (xlr64) [14.1R4.8]
JUNOS Border Gateway Function PIC package [14.1R4.8]
JUNOS Services Captive Portal and Content Delivery PIC package [14.1R4.8]
JUNOS Services HTTP Content Management PIC package [14.1R4.8]
JUNOS Services HTTP Content Management PIC package (xlr64) [14.1R4.8]
JUNOS IDP Services PIC Package [14.1R4.8]
JUNOS Services JFLOW PIC package [14.1R4.8]
JUNOS Services JFLOW PIC package (xlp64) [14.1R4.8]
JUNOS Services LL-PDF PIC package [14.1R4.8]
[edit]
root#
Code: Select all
root# show
## Last changed: 2018-03-21 17:41:01 UTC
version 14.1R4.8;
system {
root-authentication {
encrypted-password "$1$LDox/q79$1FcJ8KBumLom/kx4TnIMI/"; ## SECRET-DATA
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
interfaces {
inactive: ge-0/0/0 {
mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
em2 {
inactive: mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
}
[edit]
root# commit
em2error setting host MAC filter table
em2error setting host MAC filter table
commit complete
[edit]
root# run show route
inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/24 *[Direct/0] 00:00:54
> via em2.0
10.0.0.2/32 *[Local/0] 00:00:54
Local via em2.0
[edit]
root# run ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
^C
--- 10.0.0.1 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
[edit]
root# run show version
Model: vmx
Junos: 14.1R4.8
JUNOS Base OS Software Suite [14.1R4.8]
JUNOS Base OS boot [14.1R4.8]
JUNOS Crypto Software Suite [14.1R4.8]
JUNOS Online Documentation [14.1R4.8]
JUNOS Kernel Software Suite [14.1R4.8]
JUNOS Routing Software Suite [14.1R4.8]
JUNOS Runtime Software Suite [14.1R4.8]
JUNOS Services AACL PIC package [14.1R4.8]
JUNOS Services Application Level Gateway [14.1R4.8]
JUNOS Services Application Level Gateway (xlp64) [14.1R4.8]
JUNOS Services Application Level Gateway (xlr64) [14.1R4.8]
JUNOS AppId Services PIC Package [14.1R4.8]
JUNOS Services AppId PIC package (xlr64) [14.1R4.8]
JUNOS Border Gateway Function PIC package [14.1R4.8]
JUNOS Services Captive Portal and Content Delivery PIC package [14.1R4.8]
JUNOS Services HTTP Content Management PIC package [14.1R4.8]
JUNOS Services HTTP Content Management PIC package (xlr64) [14.1R4.8]
JUNOS IDP Services PIC Package [14.1R4.8]
JUNOS Services JFLOW PIC package [14.1R4.8]
JUNOS Services JFLOW PIC package (xlp64) [14.1R4.8]
JUNOS Services LL-PDF PIC package [14.1R4.8]
[edit]
root# run show arp
MAC Address Address Name Interface Flags
50:00:00:01:00:02 10.0.0.1 10.0.0.1 em2.0 none
[edit]
root# show
## Last changed: 2018-03-21 17:41:12 UTC
version 14.1R4.8;
system {
root-authentication {
encrypted-password "$1$LDox/q79$1FcJ8KBumLom/kx4TnIMI/"; ## SECRET-DATA
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
interfaces {
inactive: ge-0/0/0 {
mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
em2 {
inactive: mac 50:00:00:02:00:02;
unit 0 {
family inet {
address 10.0.0.2/24;
}
}
}
}
[edit]
root#