Can't ping directly connected interfaces on Juniper

[faze_wave]

Hi, I recently installed eve-ng on my macbook pro and tried setting up a couple test labs with both Juniper olives and vsrx(firefly's) but can't for the life of me get a simple ping to work across a single directly connected link. Is there a switch I need to toggle or something I'm missing? Thanks.

[ddeback]

Are you sourcing the packet from the ip on the link ? or using ping x.x.x.x bypass-routing ?
If you source the icmp from the loopback ( default) and the far side does not know how to reach the local loopback the ping will fail.

[faze_wave]

It's a directly connected link between 2 devices with IP's assigned to the interfaces from the same subnet. I should be able to ping directly across the link without specifying anything but #ping <IP of other side>
ie 10.10.10.1/24 <-----------------> 10.10.10.2/24
I've tried this with 3 separate images (olive 12.x, vSRX12.x, and cisco7200) and none of them work.

[Uldis (UD)]

what is that version of EVE, looks like simply screwed..
Get fresh eve and install it.

http://www.eve-ng.net/downloads/eve-ng-2

UD

[faze_wave]

Reinstalling fixed it. Thanks.