From
https://www.eve-ng.net/documentation/images-table
Directory and file name
hpvsr-vsr1000 > hda.qcow2
Create the HP VSR directory.
# mkdir /opt/unetlab/addons/qemu/hpvsr-vsr1000
Change directory.
# cd /opt/unetlab/addons/qemu/hpvsr-vsr1000
Copy HPE VSR ISO image to directory using WinSCP or Filezilla.
In my case > VSR1000_HPE-CMW710-E0321P01-X64.iso
Create virtual disk to install the appliance on.
/opt/unetlab/addons/qemu/hpvsr-vsr1000# sudo /usr/bin/qemu-img create -f qcow2 hda.qcow2 8G
Formatting 'hda.qcow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
Confirm you have everything
/opt/unetlab/addons/qemu/hpvsr-vsr1000# ls -lah
total 274M
drwxr-xr-x 2 root root 4.0K Feb 5 10:05 .
drwxr-xr-x 5 root root 4.0K Feb 4 11:42 ..
-rw-r--r-- 1 root root 193K Feb 5 10:05 hda.qcow2
-rw-r--r-- 1 root root 274M Dec 5 2015 VSR1000_HPE-CMW710-E0321P01-X64.iso
Fireup qemu using the hda and iso with 2 gig of ram.
/opt/unetlab/addons/qemu/hpvsr-vsr1000# /usr/bin/qemu-system-x86_64 -vnc :1 -enable-kvm hda.qcow2 -cdrom VSR1000_HPE-CMW710-E0321P01-X64.iso -m 2G
Now you need to connect to the vsr1000 appliance via vnc x.x.x.x:5901 (no encryption) where x.x.x.x is the ip of ur eve-ng server.
Follow the prompts and install the OS.
Finish the install > Reboot.
Ctrl C and kill the qemu session.
^C qemu-system-x86_64: terminating on signal 2
Fix Permissions.
/opt/unetlab/addons/qemu/hpvsr-vsr1000# /opt/unetlab/wrappers/unl_wrapper -a fixpermissions
Done.
Ahh remember to clean out VSR1000_HPE-CMW710-E0321P01-X64.iso file...
/opt/unetlab/addons/qemu/hpvsr-vsr1000# rm VSR1000_HPE-CMW710-E0321P01-X64.iso
Now ur done.