I am not entirely sure if this is an EVE-NG problem or a Mikrotik CHR problem but I am noticing that my interfaces sometimes change when shutting down or rebooting the node
I am running Mikrotik CHR 6.40
For example if I connect eht1 router A to eth2 router B after a reboot of the nodes or tunr all nodes off and the connection inside the routers might have changed to eth10 on router B.
Mikrotik images work but interfaces shuffle
Moderator: mike
-
- Posts: 2
- Joined: Wed Jun 13, 2018 6:45 pm
Re: Mikrotik images work but interfaces shuffle
Did you solve this issie? I'm new to Eve-NG and have the same issue here.
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Mikrotik images work but interfaces shuffle
get older Mikrotik, as I know v39 was fine
-
- Posts: 4
- Joined: Mon May 15, 2017 3:01 pm
Re: Mikrotik images work but interfaces shuffle
The same for 6.40, 6.42:
It seems this is mikrotik problem - in vmawre it doesn't work too.
https://forum.mikrotik.com/viewtopic.ph ... 05#p676105
It seems this is mikrotik problem - in vmawre it doesn't work too.
https://forum.mikrotik.com/viewtopic.ph ... 05#p676105