Cisco IOS showing error after initial stat-up.

Moderator: mike

Post Reply
hrishikesh
Posts: 1
Joined: Mon Feb 19, 2018 9:39 pm

Cisco IOS showing error after initial stat-up.

Post by hrishikesh » Mon Feb 19, 2018 9:44 pm

Guys need help, I am new to eve and I have done the installation as per guidance provide in the eve official website, the problem I got into that after router start-up it is showing the following massage:

Would you like to enter the initial configuration dialog? [yes/no]: n
% Crashinfo may not be recovered at bootflash:crashinfo
% This file system device reports an error

Is it because due to damage IOS image, or the issue lies with other thing.

Thanks in advance, will appreciate a quick response.

Uldis (UD)
Posts: 2103
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Cisco IOS showing error after initial stat-up.

Post by Uldis (UD) » Tue Feb 20, 2018 1:13 am

wait a bit, it will go forward :)

hyperion57070
Posts: 3
Joined: Tue Mar 12, 2019 1:21 pm

Re: Cisco IOS showing error after initial stat-up.

Post by hyperion57070 » Fri Mar 15, 2019 3:34 pm

I have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)

Uldis (UD)
Posts: 2103
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Cisco IOS showing error after initial stat-up.

Post by Uldis (UD) » Fri Mar 15, 2019 9:46 pm

hyperion57070 wrote:
Fri Mar 15, 2019 3:34 pm
I have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)
your problem is different one and answered in other your post

Post Reply