I have olive-12.1R1.9-Virtualbox-image install on EVE-NG 2.0.3-71 When it boots I got the below.
Please let me know how to fix this issue. Thanks.
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:ad0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
Code: Select all
/boot/modules/if_bge.ko text=0xac90 data=0x360+0xc syms=[0x4+0xdb0+0x4+0xd70]
/boot/modules/if_em.ko text=0x14f9c data=0x7a0+0x14 syms=[0x4+0x1870+0x4+0x1c2]/
/boot/modules/mpt_core.ko text=0x18dfc data=0x488+0x358 syms=[0x4+0x1950+0x4+0x1d77]
/boot/modules/if_bce.ko text=0xd35c data=0x16d94+0x24e4 syms=[0x4+0x1520+0x4+0x17cd]
/boot/modules/acb.ko text=0x6200 data=0x324+0x148 syms=[0x4+0xe20+0x4+0xe3e]
/boot/modules/mcs.ko text=0x4ce8 data=0x390+0xec syms=[0x4+0xc00+0x4+0xb86]
/boot/modules/scs.ko text=0x7b4c data=0x564+0x184 syms=[0x4+0x10d0+0x4+0x113d]
/boot/modules/rcb.ko text=0x2b10 data=0x178+0x38 syms=[0x4+0x7e0+0x4+0x718]
/boot/modules/cb.ko text=0x6930 data=0x3a4+0x11c syms=[0x4+0xf00+0x4+0xe54]
/boot/modules/mesw.ko text=0x63ac data=0x344+0x78 syms=[0x4+0xbf0+0x4+0xee3]
/boot/modules/cbd.ko text=0x1fa8 data=0x98+0xc syms=[0x4+0x510+0x4+0x40c]
/boot/modules/sfccb.ko text=0xe70 data=0x1c0+0x1c syms=[0x4+0x550+0x4+0x4af]
/boot/modules/sngcb.ko text=0x1040 data=0x1c0+0x20 syms=[0x4+0x5b0+0x4+0x515]
/boot/modules/mac_runasnonroot.ko text=0x93c data=0x4d4 syms=[0x4+0x330+0x4+0x3bf]
/boot/modules/mac_pcap.ko text=0x6f0 data=0x4e0+0x4 syms=[0x4+0x300+0x4+0x34e]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
platform_early_bootinit: M/T Series Early Boot Initialization
Olive CPU
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2012, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1R1.9 #0: 2012-03-24 12:52:33 UTC
builder@greteth:/volume/build/junos/12.1/release/12.1R1.9/obj-i386/junos/bsd/kernels/JUNIPER/kernel
MPTable: <BOCHSCPU 0.1 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: QEMU Virtual CPU version 1.0 (5970.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x623 Stepping = 3
Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
Features2=0x80802001<SSE3,CX16,POPCNT,<b31>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x21<LAHF,ABM>
real memory = 1073733632 (1023 MB)
avail memory = 1038921728 (990 MB)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Initializing M/T platform properties ..
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc140-0xc14f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc000-0xc03f mem 0xfeae0000-0xfeafffff irq 10 at device 2.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc040-0xc07f mem 0xfeb20000-0xfeb3ffff irq 11 at device 3.0 on pci0
em1: Memory Access and/or Bus Master bits were not set!
em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc080-0xc0bf mem 0xfeb60000-0xfeb7ffff irq 11 at device 4.0 on pci0
em2: Memory Access and/or Bus Master bits were not set!
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc0c0-0xc0ff mem 0xfeba0000-0xfebbffff irq 10 at device 5.0 on pci0
em3: Memory Access and/or Bus Master bits were not set!
pci0: <mass storage, SCSI> at device 6.0 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xed800-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: MDA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 1 ..
Setting up M/T interface operations and attributes
platform_mastership_init: Unknown product_type 0x00000001
bmeb: bmeb_lib_init done 0xc3984800, addr 0xc0dc5b00
em3: bus=0, device=5, func=0, Ethernet address 50:00:00:05:00:03
em2: bus=0, device=4, func=0, Ethernet address 50:00:00:05:00:02
em1: bus=0, device=3, func=0, Ethernet address 50:00:00:05:00:01
em0: bus=0, device=2, func=0, Ethernet address 50:00:00:05:00:00
Timecounter "TSC" frequency 5969997490 Hz quality 800
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:ad0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>