Hello Experts,
I am trying to build a LAB that VCP will inter-connected with two vFPCs, I just referred to below link:
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/
I can see two vFPC in command of "show chassis fpc" result, and I can also see ge-1/x/x, ge-2/x/x in command output "show interface terse".
and I trying to configure IP address on both side of a link, however it's failed to ping remote IP, and no ARP data, and no ospf neighbor.
I am not sure what the problem is, need your experience here, or a correct way to build two or more FPCs to one VCP.
thanks for your suggestion, any information is appreciated!
Stanley
How to deploy multiple vFPC with vMX 17.3R3.10
Moderator: mike
-
- Posts: 3
- Joined: Tue Aug 22, 2017 10:31 am
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: How to deploy multiple vFPC with vMX 17.3R3.10
My good friend Christian did it
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/
-
- Posts: 3
- Joined: Tue Aug 22, 2017 10:31 am
Re: How to deploy multiple vFPC with vMX 17.3R3.10
Yes, I was refer to this post from your friend too, but it's not working as expected.
The result is ping failed, and IGP does not work, I cannot see any OSPF neighbor on the interface.
so I am wondering there is something goes wrong, but not sure why... if any further information, please give me some hint.
thanks for your help.
Stanley
The result is ping failed, and IGP does not work, I cannot see any OSPF neighbor on the interface.
so I am wondering there is something goes wrong, but not sure why... if any further information, please give me some hint.
thanks for your help.
Stanley
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: How to deploy multiple vFPC with vMX 17.3R3.10
follow next webcast https://learningportal.juniper.net/juni ... x?id=11421
Christian will be able to answer and to show you how to do it...
E.
Christian will be able to answer and to show you how to do it...
E.
-
- Posts: 3
- Joined: Tue Aug 22, 2017 10:31 am
Re: How to deploy multiple vFPC with vMX 17.3R3.10
Hello, just registered, thanks for your information!
Stanley
Stanley
-
- Posts: 42
- Joined: Wed Feb 12, 2020 7:43 am
- Location: UK
- Contact:
Re: How to deploy multiple vFPC with vMX 17.3R3.10
can you post the output of show chassis fpc