Page 1 of 1
Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Tue Oct 20, 2020 1:46 pm
by Networker_1904
Hi,
I am using vmx version 18.2R2-S5.1, on my lab.
after started all me nodes (VCP and VFP) I get the following output
Wind River Linux 6.0.0.21 localhost console
localhost login:
I have tried usename: admin/root without password, but it doesn´t work.
Is anyone here that can help please ?
Thanks
Networker_1904
Re: Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Tue Oct 20, 2020 8:26 pm
by Uldis (UD)
on new vMX its just root
no pass
Code: Select all
Wind River Linux 9.0.0.20 qemux86-64 console
qemux86-64 login: root
root@qemux86-64:~#
Re: Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Wed Oct 21, 2020 11:07 am
by Networker_1904
Hi Uldis,
I changed the version, now I am running 16.1R3.10, it worked for VCP. I meant root/no password, but for VFP there is still the same issue
Thanks
Kr,
Networker_1904
Re: Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Wed Oct 21, 2020 11:29 am
by Networker_1904
This is okay for vMX-VCP
login: root
--- JUNOS 16.2R1.6 Kernel 64-bit JNPR-10.3-20161102.338446_build
root@:~ #
but not for vMX-VFP
ind River Linux 6.0.0.13 localhost console
localhost login: root
Password:
Login incorrect
localhost login:
Re: Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Wed Oct 21, 2020 2:34 pm
by Uldis (UD)
kronicklez wrote: ↑Wed Oct 21, 2020 12:31 pm
Hi,
why u need access VFP? U just need access VCP to configure vMX.
Thanks
Totally agree, why need access to VFP
Re: Juniper vmx version 18.2R2-S5.1 (Username/Password) ?
Posted: Wed Oct 21, 2020 8:05 pm
by Networker_1904
Hi,
Yes, you are right...
Thanks a lot.
Kr