fullk9-R-XRV9000-601.1 - how to

Moderator: mike

Post Reply
tcpip
Posts: 86
Joined: Thu Jun 15, 2017 10:09 am

fullk9-R-XRV9000-601.1 - how to

Post by tcpip » Mon Jan 08, 2018 5:27 pm

hi all,

I have fullk9-R-XRV9000-601.1 for the XRV 9000, i add it with 2 core and 16gb memory but is not booting,


Any ideas ?

Thanks.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: fullk9-R-XRV9000-601.1 - how to

Post by Uldis (UD) » Mon Jan 08, 2018 7:42 pm

Crazy good CPU need, min 4 cores for this node.
single node need x4 vCPU and 16g RAM

UD

tcpip
Posts: 86
Joined: Thu Jun 15, 2017 10:09 am

Re: fullk9-R-XRV9000-601.1 - how to

Post by tcpip » Tue Jan 09, 2018 12:05 pm

Hello UD

I changed the config as you stated, but i get to this screen and then it reboots


################################################################################
# #
# Welcome to the Cisco IOS XRv9k platform #
# #
# Please wait for Cisco IOS XR to start. #
# #
# Copyright (c) 2014-2016 by Cisco Systems, Inc. #
# #
################################################################################

Cisco IOS XR console will start on the 1st serial port
Cisco IOS XR aux console will start on the 2nd serial port
Cisco Calvados console will start on the 3rd serial port


Thanks.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: fullk9-R-XRV9000-601.1 - how to

Post by Uldis (UD) » Tue Jan 09, 2018 7:04 pm

usually happens when no power to boot that device....

tcpip
Posts: 86
Joined: Thu Jun 15, 2017 10:09 am

Re: fullk9-R-XRV9000-601.1 - how to

Post by tcpip » Wed Jan 10, 2018 8:44 pm

Hi,

I managed to make it work, but the strange thing is that I have 2 9000 connected directly and ping is not working,

Any ideas what can this be?

Thanks.

Post Reply