Guys need help, I am new to eve and I have done the installation as per guidance provide in the eve official website, the problem I got into that after router start-up it is showing the following massage:
Would you like to enter the initial configuration dialog? [yes/no]: n
% Crashinfo may not be recovered at bootflash:crashinfo
% This file system device reports an error
Is it because due to damage IOS image, or the issue lies with other thing.
Thanks in advance, will appreciate a quick response.
Cisco IOS showing error after initial stat-up.
Moderator: mike
-
- Posts: 1
- Joined: Mon Feb 19, 2018 9:39 pm
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Cisco IOS showing error after initial stat-up.
wait a bit, it will go forward
-
- Posts: 3
- Joined: Tue Mar 12, 2019 1:21 pm
Re: Cisco IOS showing error after initial stat-up.
I have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Cisco IOS showing error after initial stat-up.
your problem is different one and answered in other your posthyperion57070 wrote: ↑Fri Mar 15, 2019 3:34 pmI have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)