Page 1 of 1

Cisco IOS showing error after initial stat-up.

Posted: Mon Feb 19, 2018 9:44 pm
by hrishikesh
Guys need help, I am new to eve and I have done the installation as per guidance provide in the eve official website, the problem I got into that after router start-up it is showing the following massage:

Would you like to enter the initial configuration dialog? [yes/no]: n
% Crashinfo may not be recovered at bootflash:crashinfo
% This file system device reports an error

Is it because due to damage IOS image, or the issue lies with other thing.

Thanks in advance, will appreciate a quick response.

Re: Cisco IOS showing error after initial stat-up.

Posted: Tue Feb 20, 2018 1:13 am
by Uldis (UD)
wait a bit, it will go forward :)

Re: Cisco IOS showing error after initial stat-up.

Posted: Fri Mar 15, 2019 3:34 pm
by hyperion57070
I have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)

Re: Cisco IOS showing error after initial stat-up.

Posted: Fri Mar 15, 2019 9:46 pm
by Uldis (UD)
hyperion57070 wrote:
Fri Mar 15, 2019 3:34 pm
I have the same problem..
And most of the time when i'm working on CLI on the C3725 : Node crash and after reboot and restart, me device has an error with the flash memory (0 available)
your problem is different one and answered in other your post