Config Export Timeout
Moderator: mike
-
- Posts: 1
- Joined: Fri Sep 07, 2018 1:35 am
Config Export Timeout
Is there a way to adjust the configuration export features timeout? When using IOSv switch images, the emulation and my system cause them to respond slower than other images. I can watch the console while doing a config export and its to the banner when EVE times out and says export failed. If I could increase it about 5 seconds, I should be fine. Additionally, if I start strategically shutting nodes down, I can export on these IOSv switches fine.
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Config Export Timeout
yes, read our Cookbook...
you can increate timer for export..
edit lab and check/change 300 to 600 or more
side bar/more actions/edit lab
Config Script Timeout
chnage to higher value, it is tine when node is waiting to boot from export
Uldis
you can increate timer for export..
edit lab and check/change 300 to 600 or more
side bar/more actions/edit lab
Config Script Timeout
chnage to higher value, it is tine when node is waiting to boot from export
Uldis