Node starts and stops in a second

[kirti]

Hello,

I am not able to start node completely, tried on juniper srx and Cisco Nexus..
It comes up for couple of seconds and then stops.

Here is what I see under wrapper -

Nov 27 03:51:33 INFO: starting /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 2 -t "NXOS" -F /opt/qemu/bin/qemu-system-x86_64 -d 0 -- -nographic -device e1000,addr=3.0,multifunction=on,netdev=net0,mac=50:00:00:02:00:00 -netdev tap,id=net0,ifname=vunl0_2_0,script=no -device e1000,addr=3.1,multifunction=on,netdev=net1,mac=50:00:00:02:00:01 -netdev tap,id=net1,ifname=vunl0_2_1,script=no -device e1000,addr=3.2,multifunction=on,netdev=net2,mac=50:00:00:02:00:02 -netdev tap,id=net2,ifname=vunl0_2_2,script=no -device e1000,addr=3.3,multifunction=on,netdev=net3,mac=50:00:00:02:00:03 -netdev tap,id=net3,ifname=vunl0_2_3,script=no -device e1000,addr=4.0,multifunction=on,netdev=net4,mac=50:00:00:02:00:04 -netdev tap,id=net4,ifname=vunl0_2_4,script=no -device e1000,addr=4.1,multifunction=on,netdev=net5,mac=50:00:00:02:00:05 -netdev tap,id=net5,ifname=vunl0_2_5,script=no -device e1000,addr=4.2,multifunction=on,netdev=net6,mac=50:00:00:02:00:06 -netdev tap,id=net6,ifname=vunl0_2_6,script=no -device e1000,addr=4.3,multifunction=on,netdev=net7,mac=50:00:00:02:00:07 -netdev tap,id=net7,ifname=vunl0_2_7,script=no -smp 2 -m 8192 -name NXOS -uuid a21b2b04-af34-40d5-8779-f00ddf49e383 -device ahci,id=ahci0,bus=pci.0 -drive file=sataa.qcow2,if=none,id=drive-sata-disk0,format=qcow2 -device ide-drive,bus=ahci0.0,drive=drive-sata-disk0,id=drive-sata-disk0,bootindex=1 -bios /opt/qemu/share/qemu/OVMF-sata.fd -machine type=pc,accel=kvm -serial mon:stdio -nographic -enable-kvm > /opt/unetlab/tmp/0/a8973946-3e23-4c83-8b36-4cec3192bec2/2/wrapper.txt 2>&1 &

Nov 27 03:51:33 INFO: CWD is /opt/unetlab/tmp/0/a8973946-3e23-4c83-8b36-4cec3192bec2/2

Nov 27 03:51:33 INFO: sysctl -w net.ipv6.conf.vunl0_2_7.disable_ipv6=1

Nov 27 03:51:33 INFO: tunctl -u unl0 -g root -t vunl0_2_7 2>&1

Nov 27 03:51:33 INFO: sysctl -w net.ipv6.conf.vunl0_2_6.disable_ipv6=1

Nov 27 03:51:33 INFO: tunctl -u unl0 -g root -t vunl0_2_6 2>&1

Nov 27 03:51:33 INFO: sysctl -w net.ipv6.conf.vunl0_2_5.disable_ipv6=1

Nov 27 03:51:33 INFO: tunctl -u unl0 -g root -t vunl0_2_5 2>&1

Nov 27 03:51:33 INFO: sysctl -w net.ipv6.conf.vunl0_2_4.disable_ipv6=1

Nov 27 03:51:33 INFO: tunctl -u unl0 -g root -t vunl0_2_4 2>&1

Nov 27 03:51:33 INFO: sysctl -w net.ipv6.conf.vunl0_2_3.disable_ipv6=1

Nov 27 03:51:33 INFO: tunctl -u unl0 -g root -t vunl0_2_3 2>&1

Nov 27 03:51:32 INFO: sysctl -w net.ipv6.conf.vunl0_2_2.disable_ipv6=1

Nov 27 03:51:32 INFO: tunctl -u unl0 -g root -t vunl0_2_2 2>&1

Nov 27 03:51:32 INFO: sysctl -w net.ipv6.conf.vunl0_2_1.disable_ipv6=1

Nov 27 03:51:32 INFO: tunctl -u unl0 -g root -t vunl0_2_1 2>&1

Nov 27 03:51:32 INFO: sysctl -w net.ipv6.conf.vunl0_2_0.disable_ipv6=1

Nov 27 03:51:32 INFO: tunctl -u unl0 -g root -t vunl0_2_0 2>&1

Nov 27 03:51:27 INFO: starting /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 1 -t "vSRX-NG" -F /opt/qemu/bin/qemu-system-x86_64 -d 0 -- -nographic -device virtio-net-pci,netdev=net0,mac=50:00:00:01:00:00 -netdev tap,id=net0,ifname=vunl0_1_0,script=no -device virtio-net-pci,netdev=net1,mac=50:00:00:01:00:01 -netdev tap,id=net1,ifname=vunl0_1_1,script=no -device virtio-net-pci,netdev=net2,mac=50:00:00:01:00:02 -netdev tap,id=net2,ifname=vunl0_1_2,script=no -device virtio-net-pci,netdev=net3,mac=50:00:00:01:00:03 -netdev tap,id=net3,ifname=vunl0_1_3,script=no -smp 2 -m 4096 -name vSRX-NG -uuid c8bd3b8f-f49c-4aa2-ade1-5e906e5083f1 -drive file=virtioa.qcow2,if=virtio,bus=0,unit=0,cache=none -machine type=pc-1.0,accel=kvm -cpu qemu64,+ssse3,+sse4.1,+sse4.2,+x2apic,+aes,pclmulqdq -serial mon:stdio -nographic -nodefconfig -nodefaults -rtc base=utc > /opt/unetlab/tmp/0/a8973946-3e23-4c83-8b36-4cec3192bec2/1/wrapper.txt 2>&1 &

Nov 27 03:51:27 INFO: CWD is /opt/unetlab/tmp/0/a8973946-3e23-4c83-8b36-4cec3192bec2/1

Nov 27 03:51:27 INFO: sysctl -w net.ipv6.conf.vunl0_1_3.disable_ipv6=1

Nov 27 03:51:27 INFO: tunctl -u unl0 -g root -t vunl0_1_3 2>&1

[Uldis (UD)]

you have not enabled Intel VT-x/EPT function on your CPU dear, and didnt watch how to install video as well

Uldis