Huawei Switch Support
Moderator: mike
-
- Posts: 24
- Joined: Mon Sep 25, 2017 2:19 pm
Huawei Switch Support
Huawei gives a virtual HDD file for their CE6800 switch. This image can be run through their eNSP software. It the background it runs a vm using virtualbox. Is it possible to add this into EVE-NG.
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Huawei Switch Support
no, it is special node for eNSP.
Per my experience no one of eNSP worked as KVM virtual machines.
Real production virtual machine like SG6000, is working and all ok
Per my experience no one of eNSP worked as KVM virtual machines.
Real production virtual machine like SG6000, is working and all ok
-
- Posts: 6
- Joined: Tue Feb 06, 2018 9:35 pm
- Location: Austria
Re: Huawei Switch Support
Sorry for reviving an old post, but I came across this when searching for something.
Currently you (still) can't run the CE6800 outside of eNSP. It was also asked on the Huawei forum by somebody. I replied on page two where I am stuck. If you have time you can go on from there, but it will be a long and bumpy road
https://forum.huawei.com/enterprise/en/ ... ra=&page=2
Greets,
uebi
Currently you (still) can't run the CE6800 outside of eNSP. It was also asked on the Huawei forum by somebody. I replied on page two where I am stuck. If you have time you can go on from there, but it will be a long and bumpy road
https://forum.huawei.com/enterprise/en/ ... ra=&page=2
Greets,
uebi