Red VRF has access to the Internet (off CE9-I).
Blue/Green are allowed to see each other and the management networks (off CE10-M).
PC's should be able to ping each other if they are in the same VRF.
There are Xconnect from PE1/PE2 to PE3/PE4 (active + standby) for all CE1-CE6.
The MPLS is VPNv4 and VPNv6 with tunnel support.
Basically this should show off a lot of the MPLS functionality that IOU/IOL can support (and still run on EVE with 4GB RAM).
Have fun with it.
Tony
Code: Select all
Loopback IP:
CE1-R 1.1.3.1 (Red VRF)
CE2-G 1.1.3.2 (Green VRF)
CE3-B 1.1.3.3 (Blue VRF)
CE4-R 1.1.3.4 (Red VRF)
CE5-G 1.1.3.5 (Green VRF)
CE6-B 1.1.3.6 (Blue VRF)
CE9-I 1.1.3.9 (Internet VRF)
CE10-M 1.1.3.10 (Management VRF)
PE1 1.1.2.1
PE2 1.1.2.2
PE3 1.1.2.3
PE4 1.1.2.4
PE9 1.1.2.9
PE10 1.1.2.10
P1 1.1.1.1
P2 1.1.1.2
P3 1.1.1.3
P4 1.1.1.4
Code: Select all
My EVE has 10 PNET:
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet0
172.16.0.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet1
172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet2
172.16.2.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet3
172.16.3.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet4
172.16.10.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet5
172.16.11.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet6
172.16.12.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet7
172.16.13.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet8
172.16.14.0 0.0.0.0 255.255.255.0 U 0 0 0 pnet9
172.16.88.0 0.0.0.0 255.255.255.0 U 0 0 0 docker0
172.16.99.0 0.0.0.0 255.255.255.0 U 0 0 0 nat0
Code: Select all
CE1-R#traceroute 30.1.40.2
Type escape sequence to abort.
Tracing the route to 30.1.40.2
VRF info: (vrf in name/id, vrf out name/id)
1 20.2.1.1 0 msec 1 msec 1 msec
2 10.2.12.1 [AS 300] [MPLS: Labels 30/56 Exp 0] 2 msec 2 msec 2 msec
3 10.2.4.2 [AS 300] [MPLS: Labels 19/56 Exp 0] 2 msec 1 msec 2 msec
4 10.4.13.2 [AS 300] [MPLS: Labels 0/56 Exp 0] 2 msec 1 msec 2 msec
5 20.3.4.2 [AS 100] 1 msec 1 msec 1 msec
6 30.1.40.2 [AS 100] 2 msec 1 msec 2 msec
Code: Select all
CE1-R#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override
Gateway of last resort is 20.2.1.1 to network 0.0.0.0
B* 0.0.0.0/0 [20/0] via 20.2.1.1, 00:04:55
1.0.0.0/32 is subnetted, 3 subnets
C 1.1.3.1 is directly connected, Loopback0
B 1.1.3.4 [20/0] via 20.2.1.1, 00:04:58
B 1.1.3.9 [20/0] via 20.2.1.1, 00:04:55
20.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
C 20.1.1.0/24 is directly connected, Ethernet0/0
L 20.1.1.2/32 is directly connected, Ethernet0/0
C 20.2.1.0/24 is directly connected, Ethernet1/0
L 20.2.1.2/32 is directly connected, Ethernet1/0
B 20.3.4.0/24 [20/0] via 20.2.1.1, 00:04:58
B 20.4.4.0/24 [20/0] via 20.2.1.1, 00:04:58
B 20.9.9.0/24 [20/0] via 20.2.1.1, 00:04:55
30.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
C 30.1.1.0/24 is directly connected, Ethernet0/3
L 30.1.1.1/32 is directly connected, Ethernet0/3
C 30.1.2.0/24 is directly connected, Ethernet1/3
L 30.1.2.1/32 is directly connected, Ethernet1/3
C 30.1.10.0/24 is directly connected, Ethernet0/1
L 30.1.10.1/32 is directly connected, Ethernet0/1
B 30.1.40.0/24 [20/0] via 20.2.1.1, 00:04:58
172.16.0.0/24 is subnetted, 4 subnets
B 172.16.0.0 [20/0] via 20.2.1.1, 00:04:55
B 172.16.1.0 [20/0] via 20.2.1.1, 00:04:55
B 172.16.2.0 [20/0] via 20.2.1.1, 00:04:55
B 172.16.3.0 [20/0] via 20.2.1.1, 00:04:55
B 192.168.1.0/24 [20/0] via 20.2.1.1, 00:04:55
192.168.2.0/25 is subnetted, 1 subnets
B 192.168.2.0 [20/0] via 20.2.1.1, 00:04:55
Code: Select all
CE1-R#sh ipv6 route
IPv6 Routing Table - default - 16 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
B - BGP, HA - Home Agent, MR - Mobile Router, R - RIP
H - NHRP, I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea
IS - ISIS summary, D - EIGRP, EX - EIGRP external, NM - NEMO
ND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - Redirect
O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2, la - LISP alt
lr - LISP site-registrations, ld - LISP dyn-eid, a - Application
LC 2001::1:1:3:1/128 [0/0]
via Loopback0, receive
B 2001::1:1:3:4/128 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::1:1:3:9/128 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
C 2001::20:1:1:0/120 [0/0]
via Ethernet0/0, directly connected
L 2001::20:1:1:2/128 [0/0]
via Ethernet0/0, receive
C 2001::20:2:1:0/120 [0/0]
via Ethernet1/0, directly connected
L 2001::20:2:1:2/128 [0/0]
via Ethernet1/0, receive
B 2001::20:3:4:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::20:4:4:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::20:9:9:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::172:16:0:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::172:16:1:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::172:16:2:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::172:16:3:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
B 2001::192:168:1:0/120 [20/0]
via FE80::A8BB:CCFF:FE00:600, Ethernet1/0
L FF00::/8 [0/0]
via Null0, receive
Code: Select all
CE1-R#ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 50/57/71 ms
Code: Select all
CE1-R#sh ntp associations
address ref clock st when poll reach delay offset disp
*~143.210.16.201 158.43.192.66 2 13 64 377 49.926 72.649 4.395
+~130.88.200.4 193.62.22.66 2 15 64 377 50.966 71.042 4.808
~130.88.203.12 .INIT. 16 - 256 0 0.000 0.000 15937.
~81.168.77.149 .INIT. 16 - 256 0 0.000 0.000 15937.
* sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured
Code: Select all
CE1-R#sh ip bgp all sum
For address family: IPv4 Unicast
BGP router identifier 1.1.3.1, local AS number 200
BGP table version is 20, main routing table version 20
19 network entries using 2736 bytes of memory
32 path entries using 2560 bytes of memory
5/5 BGP path/bestpath attribute entries using 760 bytes of memory
3 BGP AS-PATH entries using 72 bytes of memory
1 BGP extended community entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 6152 total bytes of memory
BGP activity 32/0 prefixes, 55/0 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
20.1.1.1 4 100 18 19 20 0 0 00:11:07 13
20.2.1.1 4 100 21 19 20 0 0 00:11:12 13
For address family: IPv6 Unicast
BGP router identifier 1.1.3.1, local AS number 200
BGP table version is 50, main routing table version 50
13 network entries using 2184 bytes of memory
23 path entries using 2392 bytes of memory
4/4 BGP path/bestpath attribute entries using 608 bytes of memory
3 BGP AS-PATH entries using 72 bytes of memory
1 BGP extended community entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 5280 total bytes of memory
BGP activity 32/0 prefixes, 55/0 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2001::20:1:1:1 4 100 17 19 50 0 0 00:11:08 10
2001::20:2:1:1 4 100 17 19 50 0 0 00:11:13 10