Hi Guys,
I just installed EVE on VMware workstation my primary OS is windows 7, My Issue after installation there no IP address/Mask/Gateway option to fill in.
There are few prompt as far as i remember assigned dns, NTP and then proxy (choose direct) after that it automatically reboot. So what I did is put a an ip address manually using the below command.
"ifconfig pnet0 192.168.1.1 netmask 255.255.255.0"
"route default gw 192.168.1.254 pnet0"
"add a DNS server on /etc/network/interface"
Result: Successful, I can now reach the internet and my laptop(vise versa).
Another issue is how can I access eve via web, when I tried accessing it using my browser with the url "http://192.168.1.1" can't able to access. Do I need to enable http service and how?
Also is it possible to access eve cli via ssh/telnet?
Thank you
Adding address Issue and access via web
Moderator: mike
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Adding address Issue and access via web
watch video dear
http://www.eve-ng.net/documentation/ins ... ne-install
or read book about IP address setup
http://www.eve-ng.net/images/EVE-COOK-BOOK-1.0.pdf
there is when it ask you set manually IP or DHCP, just need choose proper option. You simly hit enter there.
UD
http://www.eve-ng.net/documentation/ins ... ne-install
or read book about IP address setup
http://www.eve-ng.net/images/EVE-COOK-BOOK-1.0.pdf
there is when it ask you set manually IP or DHCP, just need choose proper option. You simly hit enter there.
UD
-
- Posts: 15
- Joined: Thu Jun 14, 2018 12:55 pm
-
- Posts: 15
- Joined: Thu Jun 14, 2018 12:55 pm
Re: Adding address Issue and access via web
Just want to add also I can now able to access/reach via ssh/icmp.
But still can't access it thru web browser? "Apache2 Ubuntu Default Page" Im on default page.
Does it mean that http services is not enable on eve-ng serveR?
Thanks
But still can't access it thru web browser? "Apache2 Ubuntu Default Page" Im on default page.
Does it mean that http services is not enable on eve-ng serveR?
Thanks
-
- Posts: 1
- Joined: Wed Jun 21, 2017 12:48 pm
Re: Adding address Issue and access via web
Hi Community...
I have followed the setup video for installation and have got to the point where I can ping 'www.google.com' but I cannot access the GUI from my browser... (I've tried several browsers) does anyone have suggestions of what I may have missed?
My setup/troubleshooing steps:
I gave an IP address of 192.168.16.50/24 and made the gateway IP 192.168.16.2.
VM Work Station (12.5.7 build-5813279)
VT-X - is Enabled
I have run the command '/opt/unetlab/wrappers/unl_wrapper -a fixpermissions'
Kind regards
I have followed the setup video for installation and have got to the point where I can ping 'www.google.com' but I cannot access the GUI from my browser... (I've tried several browsers) does anyone have suggestions of what I may have missed?
My setup/troubleshooing steps:
I gave an IP address of 192.168.16.50/24 and made the gateway IP 192.168.16.2.
VM Work Station (12.5.7 build-5813279)
VT-X - is Enabled
I have run the command '/opt/unetlab/wrappers/unl_wrapper -a fixpermissions'
Kind regards
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact: