Juniper vMX fpc port issue
Posted: Sat Dec 19, 2020 6:27 am
This is running on 18.2R1.9 lite mode.
The last port on any FPC is always down. Tried set chassic ports but no luck. Have anyone see that?
The last port on any FPC is always down. Tried set chassic ports but no luck. Have anyone see that?
set chassis fpc 0 number-of-ports 12
set chassis fpc 1 number-of-ports 12
# run show interfaces terse xe-0/0/9
Interface Admin Link Proto Local Remote
xe-0/0/9 up down
xe-0/0/9.0 up down inet 10.0.0.1/31
mpls
multiservice
# run show interfaces terse ge-1/0/9
Interface Admin Link Proto Local Remote
ge-1/0/9 up down