PaloAlto Routehub training lab rack by UD

Moderator: mike

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

PaloAlto Routehub training lab rack by UD

Post by Uldis (UD) » Wed Aug 02, 2017 9:39 pm

it is PaloAlto training lab rack matching RouteHub Palo course.
Logical topology loaded.

Used images:
PaloAlto 7.1 or 8.0
IOL L3 15.4.2
vIOS L3 15.6.2T
Arista vEOS 4.17.2F switches
Win7 host
Win2008 server host
VPCS Pc hosts

Enjoy !
You do not have the required permissions to view the files attached to this post.

votive
Posts: 20
Joined: Sat May 13, 2017 6:52 pm

Re: PaloAlto Routehub training lab rack by UD

Post by votive » Thu Aug 03, 2017 12:26 am

That's how to do it...code revision numbers and all.

I haven't downloaded this yet but wanted to say thank you UD.

ju9osys
Posts: 6
Joined: Sun Mar 19, 2017 4:48 am

Re: PaloAlto Routehub training lab rack by UD

Post by ju9osys » Fri Aug 04, 2017 5:42 pm

Uldis (UD) wrote:
Wed Aug 02, 2017 9:39 pm
it is PaloAlto training lab rack matching RouteHub Palo course.
Logical topology loaded.

Used images:
PaloAlto 7.1 or 8.0
IOL L3 15.4.2
vIOS L3 15.6.2T
Arista vEOS 4.17.2F switches
Win7 host
Win2008 server host
VPCS Pc hosts

Enjoy !
just thanks is very small word for you and for your work UD.

votive
Posts: 20
Joined: Sat May 13, 2017 6:52 pm

Re: PaloAlto Routehub training lab rack by UD

Post by votive » Mon Aug 14, 2017 11:00 pm

@UD - Is there any way today to get the PNG as wall paper (send to the back) and have the network devices on top (keep on top)?

The maps (png's) you and others produce are very nice with the IP but sliding out from the side isn't so good.


Thank you

ecze
Posts: 533
Joined: Wed Mar 15, 2017 1:54 pm

Re: PaloAlto Routehub training lab rack by UD

Post by ecze » Mon Aug 14, 2017 11:11 pm

Don't well understand....

Anyway, topology is topology and reflect real connection

What you ask is to mix logical and topology... It is not possible and will not be implemented.

Creating map on custom png is very easy and give ability to create specific view ....

E.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: PaloAlto Routehub training lab rack by UD

Post by Uldis (UD) » Tue Aug 15, 2017 9:52 am

votive wrote:
Mon Aug 14, 2017 11:00 pm
@UD - Is there any way today to get the PNG as wall paper (send to the back) and have the network devices on top (keep on top)?

The maps (png's) you and others produce are very nice with the IP but sliding out from the side isn't so good.


Thank you
I understand you do what you want, but then you loose all logic between physical topology, which is where you do connection of the nodes and logical topology idea.
In this case I could produce same picture on main physical topology as well, combining possible txt or shapes available on EVE.
Like in this lab pic below.
But topologies behind with clicks are specially for logical drawings use...when in the same topology you must know how the BGP, OSPF VPN design is built.
Sorry your request seems bit wierd mate..and logically not possible as well..
Cheers
UD
You do not have the required permissions to view the files attached to this post.

votive
Posts: 20
Joined: Sat May 13, 2017 6:52 pm

Re: PaloAlto Routehub training lab rack by UD

Post by votive » Wed Aug 16, 2017 8:02 pm

Yes, if only everyone did the similar effort as the one you provided but it is not common.

No problem though, the diagram slide works well as is. With two monitors, we can just display the diagram there.

greatgeek
Posts: 10
Joined: Wed May 10, 2017 3:36 am

Re: PaloAlto Routehub training lab rack by UD

Post by greatgeek » Sat Sep 02, 2017 10:14 pm

Hi Uldis, you are search a wonderful Network Architect, I have been learning a lot from you and I will like to express my sincere appreciation for your hardwork. We will be contributing immensely to your good works.
Thank you
greatgeek.

greatgeek
Posts: 10
Joined: Wed May 10, 2017 3:36 am

Re: PaloAlto Routehub training lab rack by UD

Post by greatgeek » Sat Sep 02, 2017 11:06 pm

Hi Uldis,
Please can you let us know the username and password to the labs.
Kind Regards
greatgeek

lihuilixin
Posts: 1
Joined: Thu May 04, 2017 6:03 am

Re: PaloAlto Routehub training lab rack by UD

Post by lihuilixin » Thu Jan 11, 2018 2:39 am

Hi, bro, could you tell me where you download the PA IOS 8.0?

Post Reply