SD-WAN vEdges not starting Hello,
Posted: Fri Apr 17, 2020 12:32 am
hello,
i am working with image 18.4.4 and I am not able to start the node either, these are my configuration files:
config.php file:
<? php
/ * TEMPLATE MODE .missing or .hided
*
* .hided: will hide all template not present on system (no image installed)
* .missing: will display not selectable template not present (no image installed)
*
* /
DEFINE ('TEMPLATE_DISABLED', '. Hided');
/ * Define custom templates:
*
* Create for exemple /opt/unetlab/html/templates/mytemplate.php and Create
/opt/unetlab/html/templates/othertemplate.php
* Then uncomment lines below
* /
$ custom_templates = Array (
'ngvtedge' => 'Cisco Viptela vEdge');
?>
##################################
.yml file ngvtedge.yml
# Copyright (c) 2016, Andrea Dainese
# Copyright (c) 2018, Alain Degreffe
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and / or other materials provided with the distribution.
# * Neither the name of the UNetLab Ltd nor the name of EVE-NG Ltd nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---
type: qemu
name: vEdge
cpulimit: 2
icon: Server_Win.png
cpu: 2
ram: 2048
ethernet: 5
eth_name:
- eth0
eth_format: ge0 / {0}
console: telnet
shutdown: 1
qemu_arch: x86_64
qemu_version: 2.12.0
qemu_nic: virtio-net-pci
qemu_options: -machine type = pc, accel = kvm -vga std -usbdevice tablet -boot order = dc
...
qemu configuration
/opt/unetlab/addons/qemu/ngvtedge-18.4.4
hda.qcow2
at the end I apply the command:
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
I am working with eve-ng Community version 2.0.3-95
please if anyone can help
Thank you
i am working with image 18.4.4 and I am not able to start the node either, these are my configuration files:
config.php file:
<? php
/ * TEMPLATE MODE .missing or .hided
*
* .hided: will hide all template not present on system (no image installed)
* .missing: will display not selectable template not present (no image installed)
*
* /
DEFINE ('TEMPLATE_DISABLED', '. Hided');
/ * Define custom templates:
*
* Create for exemple /opt/unetlab/html/templates/mytemplate.php and Create
/opt/unetlab/html/templates/othertemplate.php
* Then uncomment lines below
* /
$ custom_templates = Array (
'ngvtedge' => 'Cisco Viptela vEdge');
?>
##################################
.yml file ngvtedge.yml
# Copyright (c) 2016, Andrea Dainese
# Copyright (c) 2018, Alain Degreffe
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and / or other materials provided with the distribution.
# * Neither the name of the UNetLab Ltd nor the name of EVE-NG Ltd nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---
type: qemu
name: vEdge
cpulimit: 2
icon: Server_Win.png
cpu: 2
ram: 2048
ethernet: 5
eth_name:
- eth0
eth_format: ge0 / {0}
console: telnet
shutdown: 1
qemu_arch: x86_64
qemu_version: 2.12.0
qemu_nic: virtio-net-pci
qemu_options: -machine type = pc, accel = kvm -vga std -usbdevice tablet -boot order = dc
...
qemu configuration
/opt/unetlab/addons/qemu/ngvtedge-18.4.4
hda.qcow2
at the end I apply the command:
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
I am working with eve-ng Community version 2.0.3-95
please if anyone can help
Thank you