Trunk link to physical switch

[pinkraisons]

I am having difficulties connecting a physical switch to EVE-ng with a trunk port in VM Workstation. I found a couple tutorials using ESXi but none for Workstation. I have verified that my NIC supports dot1q trunking. Below are a few things that I have tried:
- Turning on/off 'Priority and VLAn' in the network device advanced settings.
- Adding ethernet0.noPromisc = "FALSE" to the .vmx file
- Creating the vlans on my network card using the 'Realtek - Ethernet Diagnostic Utility'
- If I install Debian in Workstation I can create the subinterfaces/vlans and can connect to the physical switch no problem

Thanks in advance

[Uldis (UD)]

in the windows you must enable promiscue mode on NIC manually.
in reg file
https://www.intel.co.uk/content/www/uk/ ... ducts.html

Check this mate

I did that personally and trunk from VM Ware workstation worked great to real SW
I confirm it.

Uldis

[pinkraisons]

Thank you for the help. I swapped out the Realtek NIC for an old Intel one I had laying around and that fixed the problem.