Hi;
I use Cisco ASA 9.1.(5)16 and everything is OK until now, except one thing...
The default interfaces number of this image is 4. But when I add another interface (changing the interface number from 4 to 5), the image does not recognize its interfaces at all and you must delete the node and create it from scratch with just 4 interfaces...
Any ideas?
Thanks
Adding more than 4 interfaces to Cisco ASA image...
Moderator: mike
-
- Posts: 30
- Joined: Tue Dec 10, 2019 3:48 pm
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Adding more than 4 interfaces to Cisco ASA image...
Tip, it is known bug
delete asa from topology
add new, and set interfaces qntty immediatelly how much you need
then this asa will work
change interfaces after, makes this bug.
on eve pro it is fixed
delete asa from topology
add new, and set interfaces qntty immediatelly how much you need
then this asa will work
change interfaces after, makes this bug.
on eve pro it is fixed
-
- Posts: 30
- Joined: Tue Dec 10, 2019 3:48 pm
Re: Adding more than 4 interfaces to Cisco ASA image...
Thanks; your solution worked...