Nexsu VXLAN over MPLS POC lab is not launching

[irena2020]

I am trying to load the Nexus VXLAN over MPLS POC lab written by UD.
Images used in a lab:
nxosv9k-7.0.3.i7.1,
viosl2-15.2
vios-15.6.

nxos and l2 are working fine, actually all images are working fine but I am unable to launch vios-15.6. Fixpermissions are applied, user error (typos) is checked, vCPU x20, RAM 80G. What else do I need to do to get vios-15.6 launch?

[Uldis (UD)]

try find another image, or check if you made this image properly, names etc

foldername
vios-xxxxxx
inside must be virtioa.qcow2

[irena2020]

Thanks, Uldis. Will try again

[irena2020]

yes, so I tried a bunch of vIOS images. None worked in the VXLAN lab, however, when I create a new lab and run those images separately, all work just fine. So, I am thinking there might be some settings in the LAB which prevent the L3 vIOS images to run?

[irena2020]

It says " the node started" but nothing happened. The node is not accessible " connection refused"

[Uldis (UD)]

Before you start any lab need wipe nodes, right click wipe.
Then checj if proper image is assigned for the node.

[irena2020]

It worked! Thanks so much , Uldis!