c7200 F0/0 is not working

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
mnasim
Posts: 11
Joined: Tue Mar 30, 2021 1:11 pm

c7200 F0/0 is not working

Post by mnasim » Sat Apr 03, 2021 5:21 pm

does anyone face that problem in eve-pro 4
c7206 F0/0 is not working even in a very simple P2P topology.
Module PA-FE-TX in F1/0 is working. But all of my old Labs use F0/0.

Uldis (UD)
Posts: 5060
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: c7200 F0/0 is not working

Post by Uldis (UD) » Sun Apr 04, 2021 7:23 pm

Guys when you state a problem, always tell which EVE you Have Pro or Community.
In both this Dynamips 7206 is working fine.
Just in eve pro need set 256m ram

mnasim
Posts: 11
Joined: Tue Mar 30, 2021 1:11 pm

Re: c7200 F0/0 is not working

Post by mnasim » Tue Apr 06, 2021 5:57 am

Well, i am asking about eve-ng-pro 4, because i am using it.
and NO, c7200 is not working well with F0/0.
You have to add PA-FE-TX in F1/0.

It is not a migrated Lab, it is a new Lab with the default template.
All what i have changed in the template is the idle-pc value because it didn't play well with me.
changed from 0x62f21000 to 0x62f20a04

Post Reply