Hello,
Pretty new to EVE-NG, but following the instructions for Cisco ISE ISO files and they fail to load when I start the node.
I read on the forums that 3.x versions need 8 CPUs, this did not fix it. Tried 3.0, 3.1 and 3.2 versions - some forum post mentioned 3.1 is the one to run as other might not work, but no luck.
I can't see anything useful in the logs - which logs should I be looking at? Local Units?
Any ideas? Other devices like routers, switches etc are working fine.
Thanks.
Cisco ISE fails to start - all versions
Moderator: mike
-
- Posts: 146
- Joined: Thu Mar 29, 2018 4:19 pm
Re: Cisco ISE fails to start - all versions
ise 3.x needs 4 cores and 16G ram
https://www.eve-ng.net/index.php/docume ... cisco-ise/
which cpu do you have ?
and which Eve version ?
https://www.eve-ng.net/index.php/docume ... cisco-ise/
which cpu do you have ?
and which Eve version ?
-
- Posts: 2
- Joined: Tue Dec 05, 2023 11:23 am
Re: Cisco ISE fails to start - all versions
EVE Version 5.0.1-106 Professional
Running EVE bare metal on Cisco UCS server with intel Xeon processors.
Running EVE bare metal on Cisco UCS server with intel Xeon processors.
-
- Posts: 146
- Joined: Thu Mar 29, 2018 4:19 pm
Re: Cisco ISE fails to start - all versions
have you tried different qemu versions in the node settings ? Note anytime you change qemu version you'll need to wipe that node for the changes to be applied.