Support and News Forum

Followed the installation of CSR1000v from How to's guide and I was able to succeed once in eve bare metal install..
removed the image and attempted to perform the same procedure and the image consistently getting stuck after the below while rebooting.. I cant get the command line of CSR. Are there any things that I can check for errors? Can't understand what could I be doing mistake..

[Linux-bzImage, setup=0x2e00, size=0x10ea4c00]
[isord @ 0x706cb000, 0xf924000 bytes]


Jun 05 04:23:34 INFO: starting /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 4 -t "CSR" -F /opt/qemu-2.2.0/bin/qemu-system-x86_64 -d 5 -- -nographic -device e1000,netdev=net0,mac=50:00:00:04:00:00 -netdev tap,id=net0,ifname=vunl0_4_0,script=no -device e1000,netdev=net1,mac=50:00:00:04:00:01 -netdev tap,id=net1,ifname=vunl0_4_1,script=no -device e1000,netdev=net2,mac=50:00:00:04:00:02 -netdev tap,id=net2,ifname=vunl0_4_2,script=no -device e1000,netdev=net3,mac=50:00:00:04:00:03 -netdev tap,id=net3,ifname=vunl0_4_3,script=no -smp 6 -m 16000 -name CSR -uuid db5af6d9-a8eb-49ce-b711-344d13f5dc61 -drive file=virtioa.qcow2,if=virtio,bus=0,unit=0,cache=none > /opt/unetlab/tmp/0/eef1c4c3-1e76-4dbb-ad2a-c26c99fd0b79/4/wrapper.txt 2>&1 &

does your bare eve box is Intel VT-X enabled on BIOS !?!

Yes it does. One thing I have been trying was to customize the html folder for allowing the SR nodes to configure easily. I believe that may be the factor impacting the CSR nodes to come up. Reverting backto original html folder that came up as part of eve install resovled the problem