Start-up Configs

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
Uldis (UD)
Posts: 5080
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:
Contact Uldis (UD)

Re: Start-up Configs

Post by Uldis (UD) » Mon Mar 27, 2017 9:10 pm

what is your PC config, how much CPUs are allowed for EVE, RAM??
CSR sir need serious box to run..
Top
Pcpaulh
Posts: 31
Joined: Sun Mar 19, 2017 8:38 pm

Re: Start-up Configs

Post by Pcpaulh » Mon Mar 27, 2017 9:18 pm

Hi, had a chat on a Skype session, that may well be the problem. I usually allow 6 cores and 48GB memory for the VM. It was suggested that the CSR requires 1 core per node?
Top
Uldis (UD)
Posts: 5080
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:
Contact Uldis (UD)

Re: Start-up Configs

Post by Uldis (UD) » Mon Mar 27, 2017 10:06 pm

yes
with 6 cores you can maximum run 7 CSR...
Top
Pcpaulh
Posts: 31
Joined: Sun Mar 19, 2017 8:38 pm

Re: Start-up Configs

Post by Pcpaulh » Mon Mar 27, 2017 10:20 pm

Ok thanks. What about IOSv, less CPU intensive?
Top
mike
Posts: 135
Joined: Wed Mar 15, 2017 3:30 pm

Re: Start-up Configs

Post by mike » Tue Mar 28, 2017 5:43 pm

If you stop nodes during the book with clock - that will kill the script and will show triangle with !
To fix that you need wipe and start node again.


When you boot node and it has clock showing - wait till it fully boot and change icon to play triangle - then you can stop the node
Top
Post Reply

Return to “EVE-NG Help-Desk”