Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Moderator: mike
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
I have set up a lab NX-OS Cisco NX-OS titanium-d1.7.3.0.D1.1.bin .
i have interconnected the switch .
i am booting the devices , one device is fine ,for second one i am not able to save or view show command ,its showing below error.
INIT: Id "sm" respawning too fast: disabled for 5 minutes
another issue : is lacp supported on NX-OS titanium-d1.7.3.0.D1.1.bin ?
i have checked show feature , its not displayed .
if am trying to enable lacp its getting below error
switch(config)# feature lacp
Error
switch(config)#
please help .
i have interconnected the switch .
i am booting the devices , one device is fine ,for second one i am not able to save or view show command ,its showing below error.
INIT: Id "sm" respawning too fast: disabled for 5 minutes
another issue : is lacp supported on NX-OS titanium-d1.7.3.0.D1.1.bin ?
i have checked show feature , its not displayed .
if am trying to enable lacp its getting below error
switch(config)# feature lacp
Error
switch(config)#
please help .
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
licence grace perion need activate frst
and probably your PC has no source to run second switch...
Single Titanium node need 1xCPU and 4gb RAM !!!
and probably your PC has no source to run second switch...
Single Titanium node need 1xCPU and 4gb RAM !!!
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
ok , i will upgrade my pc ram .
how to get the licence ?.
how to get the licence ?.
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Licence is inside of this node:)
just need activate it.
Sir please check cisco.com how to enale grace period on nexus:)
just need activate it.
Sir please check cisco.com how to enale grace period on nexus:)
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Sir,
i have cisco account also ,but i cant find the license . can you how to install the license and were to download .
thanks in advance
i have cisco account also ,but i cant find the license . can you how to install the license and were to download .
thanks in advance
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Sir,
i have cisco account also ,but i cant find the license . can you tell me how to install the license and were to download .
thanks in advance
i have cisco account also ,but i cant find the license . can you tell me how to install the license and were to download .
thanks in advance
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

first add command and after with feature choose what you want to use, 120 days:
Code: Select all
switch(config)# license grace-period
switch(config)# feature ?
bfd Bfd
bgp Enable/Disable Border Gateway Protocol (BGP)
bulkstat Enable/Disable Bulkstat (An embedded management
application)
cable-management Enable/Disable Cable Management Manager (CMM)
cts Enable/Disable CTS
dhcp Enable/Disable DHCP Manager
dot1x Enable/Disable dot1x
......OMITTED.....
switch(config)# feature eigrp
LAN_ENTERPRISE_SERVICES_PKG license not installed. eigrp feature will be shutdow
n after grace period of approximately 119 day(s)
switch(config)# 2017 Aug 4 20:12:29 switch %LICMGR-2-LOG_LIC_NO_LIC: No license(s) present for feature LAN_ENTERPRISE_SERVICES_PKG. Application(s) shut down in 119 days.
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
sir,
still i am getting error , i have attached the error screen shot , can you please help .
still i am getting error , i have attached the error screen shot , can you please help .
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
All simple then, your image is simply corrupted. No idea where did you get it.
Such behavioure is on broken image
join our live support skype group, then maybe we can see what you doing there:)
UD
Such behavioure is on broken image
join our live support skype group, then maybe we can see what you doing there:)
UD
-
- Posts: 20
- Joined: Fri Jul 28, 2017 3:14 am
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Hi Sir,
the file contain is 204 MB . is that correct?
thanks
the file contain is 204 MB . is that correct?
thanks