Page 1 of 2
Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Wed Aug 02, 2017 6:10 pm
by vinoth13.c
I have set up a lab NX-OS Cisco NX-OS titanium-d1.7.3.0.D1.1.bin .
i have interconnected the switch .
i am booting the devices , one device is fine ,for second one i am not able to save or view show command ,its showing below error.
INIT: Id "sm" respawning too fast: disabled for 5 minutes
another issue : is lacp supported on NX-OS titanium-d1.7.3.0.D1.1.bin ?
i have checked show feature , its not displayed .
if am trying to enable lacp its getting below error
switch(config)# feature lacp
Error
switch(config)#
please help .
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Wed Aug 02, 2017 6:26 pm
by Uldis (UD)
licence grace perion need activate frst
and probably your PC has no source to run second switch...
Single Titanium node need 1xCPU and 4gb RAM !!!
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Thu Aug 03, 2017 7:53 am
by vinoth13.c
ok , i will upgrade my pc ram .
how to get the licence ?.
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Fri Aug 04, 2017 7:48 am
by Uldis (UD)
Licence is inside of this node:)
just need activate it.
Sir please check cisco.com how to enale grace period on nexus:)
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Fri Aug 04, 2017 6:19 pm
by vinoth13.c
Sir,
i have cisco account also ,but i cant find the license . can you how to install the license and were to download .
thanks in advance
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Fri Aug 04, 2017 6:20 pm
by vinoth13.c
Sir,
i have cisco account also ,but i cant find the license . can you tell me how to install the license and were to download .
thanks in advance
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Fri Aug 04, 2017 8:13 pm
by Uldis (UD)
Do this
first add command and after with feature choose what you want to use, 120 days:
Code: Select all
switch(config)# license grace-period
switch(config)# feature ?
bfd Bfd
bgp Enable/Disable Border Gateway Protocol (BGP)
bulkstat Enable/Disable Bulkstat (An embedded management
application)
cable-management Enable/Disable Cable Management Manager (CMM)
cts Enable/Disable CTS
dhcp Enable/Disable DHCP Manager
dot1x Enable/Disable dot1x
......OMITTED.....
switch(config)# feature eigrp
LAN_ENTERPRISE_SERVICES_PKG license not installed. eigrp feature will be shutdow
n after grace period of approximately 119 day(s)
switch(config)# 2017 Aug 4 20:12:29 switch %LICMGR-2-LOG_LIC_NO_LIC: No license(s) present for feature LAN_ENTERPRISE_SERVICES_PKG. Application(s) shut down in 119 days.
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Sat Aug 05, 2017 2:35 pm
by vinoth13.c
sir,
still i am getting error , i have attached the error screen shot , can you please help .
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Sun Aug 06, 2017 9:01 am
by Uldis (UD)
All simple then, your image is simply corrupted. No idea where did you get it.
Such behavioure is on broken image
join our live support skype group, then maybe we can see what you doing there:)
UD
Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin
Posted: Tue Aug 22, 2017 5:57 pm
by vinoth13.c
Hi Sir,
the file contain is 204 MB . is that correct?
thanks