switch IOL image L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin don't take start-up configs

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
Larchen
Posts: 2
Joined: Sat Mar 25, 2017 4:06 pm

switch IOL image L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin don't take start-up configs

Post by Larchen » Sat Mar 25, 2017 4:30 pm

Hi.
Hosts with switch IOL image L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin don't take start-up configs.
EVE-NG version: 2.0.3-53
Wipe was done.
console looks like this

Code: Select all

NIX ERR:tcgetattr:Inappropriate ioctl for device

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.4(2)T4, DEVELOPMENT TEST SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 08-Oct-15 21:21 by prod_rel_team


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Linux Unix (Intel-x86) processor with 360569K bytes of memory.
Processor board ID 67109040
16 Ethernet interfaces
1024K bytes of NVRAM.

vtp mode transparent
  ^
% Invalid input detected at '^' marker.

no ip igmp snooping
            ^
% Invalid input detected at '^' marker.

spanning-tree mode rapid-pvst
              ^
% Invalid input detected at '^' marker.

spanning-tree extend system-id
              ^
% Invalid input detected at '^' marker.

vlan internal allocation policy ascending
      ^
% Invalid input detected at '^' marker.

vlan 2-10,12,23,34,45,67,78,89,109,144,235,456
     ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree portfast edge trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

 switchport trunk encapsulation dot1q
  ^
% Invalid input detected at '^' marker.

 switchport mode trunk
  ^
% Invalid input detected at '^' marker.

 spanning-tree link-type point-to-point
  ^
% Invalid input detected at '^' marker.

interface Vlan1
           ^
% Invalid input detected at '^' marker.

 ip address 10.0.0.101 255.255.255.0
           ^
% Invalid input detected at '^' marker.

 no shutdown
      ^
% Invalid input detected at '^' marker.


         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: 
Can I fix this somehow?

BTW, hosts with L3-ADVENTERPRISEK9-M-15.4-2T.bin at the same lab successfully take startup-configs.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: switch IOL image L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin don't take start-up configs

Post by Uldis (UD) » Sat Mar 25, 2017 5:32 pm

:) you trying put Switch config on L3 router image:)

(I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.4(2)T4, DEVELOPMENT TEST SOFTWARE
look at your sh run:)


It is router images sir:) 15.4.2T
Setproper switch image, usually starts L2 xxxxx, the wipe and start node

Larchen
Posts: 2
Joined: Sat Mar 25, 2017 4:06 pm

Re: switch IOL image L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin don't take start-up configs

Post by Larchen » Thu Mar 30, 2017 8:56 am

M... really. You are right...
This lab was converted from unl branch.
Thank you vary march!

Post Reply