Error CSR1000V and N9K

Moderator: mike

Post Reply
warleague12
Posts: 10
Joined: Mon May 29, 2017 11:08 pm

Error CSR1000V and N9K

Post by warleague12 » Thu Jan 16, 2020 10:28 pm

Hello Everyone,

I had a update for new version of community 2.0.3-105 last two days ago and now I am facing issue related two nodes:

CSR1000V - Denali
N9K

After made update and make confirmation about " fixpermissions " inside folder I have a problem with those plataforms which I can start the device on topology, however after that the device power off and receive a symbol below device with " triangle and lightning ". I make a " Wipe " but after start device again the same issue happens.

I don't have any problem with mem for device because I increase but keep the error.

Is there any similar issue reported about it? How to fix?

Kind Regards,

Uldis (UD)
Posts: 5083
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Error CSR1000V and N9K

Post by Uldis (UD) » Sat Jan 18, 2020 12:18 pm

trinagle means that your device is trying to boot from exported config which device won't accept to boot
put on lab fresh SCR and try start, does it boot right?

warleague12
Posts: 10
Joined: Mon May 29, 2017 11:08 pm

Re: Error CSR1000V and N9K

Post by warleague12 » Mon Jan 20, 2020 3:52 am

Unfortunately, I have create new topology and put CSR and keep with same result.

Last day I made some test, like to change version of " quemu " for this device and I already had success using only version of 2.4.0. :cry:

Any version keep with same error. Is there any idea?

Kind Regards,

Uldis (UD)
Posts: 5083
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Error CSR1000V and N9K

Post by Uldis (UD) » Mon Jan 20, 2020 9:47 pm

ypou did not mention what CPU has your host where EVE is installed !!

warleague12
Posts: 10
Joined: Mon May 29, 2017 11:08 pm

Re: Error CSR1000V and N9K

Post by warleague12 » Tue Jan 21, 2020 4:03 am

Uldis (UD) wrote:
Mon Jan 20, 2020 9:47 pm
ypou did not mention what CPU has your host where EVE is installed !!
In this computer I have VMware Workstation installed with EVE. The processor is AMD FX-8370E Eight-Core Processor

Best Regards,

Uldis (UD)
Posts: 5083
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Error CSR1000V and N9K

Post by Uldis (UD) » Tue Jan 21, 2020 8:47 am

AMD has issues with nested virtualization, especially with new Qemu versions.
Thats why we do not support it officially, in our System requirements you will find that AMD is not is 100% supported CPU list..
Sorry for that.

https://www.eve-ng.net/index.php/docume ... quirement/
As I know AMD bare EVE boxes has some success, but not nested... VM Ware or ESXi


Uldis

warleague12
Posts: 10
Joined: Mon May 29, 2017 11:08 pm

Re: Error CSR1000V and N9K

Post by warleague12 » Thu Jan 23, 2020 7:09 pm

Uldis (UD) wrote:
Tue Jan 21, 2020 8:47 am
AMD has issues with nested virtualization, especially with new Qemu versions.
Thats why we do not support it officially, in our System requirements you will find that AMD is not is 100% supported CPU list..
Sorry for that.

https://www.eve-ng.net/index.php/docume ... quirement/
As I know AMD bare EVE boxes has some success, but not nested... VM Ware or ESXi


Uldis
OK, fantastic. I appreciate you answer. I will try to keep in this case using quemu 2.4 and maybe try to get new one processor. I hope :mrgreen:

Kind Regards

Post Reply