Juniper vMX Problem

Moderator: mike

Post Reply
zendx
Posts: 2
Joined: Sat Mar 06, 2021 5:28 pm

Juniper vMX Problem

Post by zendx » Sat Mar 06, 2021 5:48 pm

HW Node: HP DL360 G6 w 2xXeon E5650 CPU
SW, Hypervisor: Proxmox 6.0 on kernel 5.0.15-1-pve with KVM

Eve-NG version: 2.0.3-112
Eve-NG VM vCPU: 8
Eve-NG VM RAM: 32G
Juniper vMX version: 18.2R1.9 (Eval)

I've created two vMX nodes following manual.

Unfortunately, the VCP nodes is chashing while booting:

Code: Select all

Loading the M&T Platform NETPFE module
MTX Platform JAM-Core module - load success
MPC NG 2E/3E JAM Plugin: load succeeded

 Loading BCMSDK module.....
KVM: entry failed, hardware error 0x80000021

                                            If you're running a guest on an Intel machine without unrestricted mode
                                                                                                                   suppostate for Intel VT. For example, the guest maybe running in big real mode
                                                                         which is not supported on less recent Intel pro
EAX=c8e3cfe4 EBX=08090128 ECX=080d92ee EDX=00000001
                                                   ESI=00042170 EDI=08090128 EBP=ffffd4b0 ESP=ffffd47c
                                                                                                      EIP=c8847dcc EFL=0ES =003b 00000000 ffffffff 00c0f300 DPL=3 DS   [-WA]
                                                    CS =0033 00000000 ffffffff 00c0fb00 DPL=3 CS32 [-RA]
                                                                                                        SS =003b 0000000DS =003b 00000000 ffffffff 00c0f300 DPL=3 DS   [-WA]
                                                    FS =0013 00000000 ffffffff 00c0f300 DPL=3 DS   [-WA]
                                                                                                        GS =001b 0000000LDT=0000 00000000 ffffffff 00c00000
                                   TR =0048 80b17d90 00002068 00008b00 DPL=0 TSS64-busy
                                                                                       GDT=     ffffffff80b1e600 0000006IDT=     ffffffff80a651e0 00000fff
                                  CR0=8005003b CR2=000000000810991e CR3=0000000036b00000 CR4=000006e0
                                                                                                     DR0=000000000000000DR6=00000000ffff0ff0 DR7=0000000000000400
                                         EFER=0000000000000d01
                                                              Code=75 35 24 0f 0f b6 c0 83 f8 02 75 2b 89 7d e0 8b 45 f0
My CPU is too old? :)

zendx
Posts: 2
Joined: Sat Mar 06, 2021 5:28 pm

Re: Juniper vMX Problem

Post by zendx » Sat Mar 06, 2021 6:08 pm

VCP boots OK when no VFP is running but when i started VFP, the VCP is crashing

I guess, there is some conflict with netsted virtualization, because VFP have nested virtualization too so we have Eve-NG (VM) -> VFP (VM) -> VFP itself.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Juniper vMX Problem

Post by Uldis (UD) » Sat Mar 06, 2021 8:09 pm

Sorry mate ut Proxmox is not in our rcommended and supported list
https://www.eve-ng.net/index.php/docume ... quirement/

Post Reply