Support and News Forum

Hi Palo Alto 8( and 9) installed at eve-ng which is sitting at ESXi cannot work(it is stuck there after it starts). and then I installed Palo alto at vmware workstation(Palot alto installed at eve-ng which is sitting at vmware workstation). It can work well. so I migrate it from the vmware work station to ESXi. After the Palo alto starts, it keeps booting. Please see the below error message.
Is there any solutions? Thank you

I followed the link protocol:
https://www.eve-ng.net/index.php/docume ... palo-alto/


Booting from Hard Disk...
Welcome to the PanOS Bootloader.


Hit any key to stop autoboot...
Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:
Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x393b50]
SeaBIOS (version rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org)
Machine UUID 49cd976d-fdc8-4db9-8a0d-44c785374260


iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+BFF913B0+BFEF13B0 C980





iPXE (http://ipxe.org) 00:04.0 CA80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CA80





iPXE (http://ipxe.org) 00:05.0 CB80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CB80





iPXE (http://ipxe.org) 00:06.0 CC80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CC80





iPXE (http://ipxe.org) 00:07.0 CD80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CD80





iPXE (http://ipxe.org) 00:08.0 CE80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CE80





iPXE (http://ipxe.org) 00:09.0 CF80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CF80





iPXE (http://ipxe.org) 00:0A.0 D080 PCI2.10 PnP PMM BFF913B0 BFEF13B0 D080



Booting from Hard Disk...
Welcome to the PanOS Bootloader.


Hit any key to stop autoboot...
Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:
Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x393b50]
SeaBIOS (version rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org)
Machine UUID 49cd976d-fdc8-4db9-8a0d-44c785374260


iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+BFF913B0+BFEF13B0 C980





iPXE (http://ipxe.org) 00:04.0 CA80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CA80





iPXE (http://ipxe.org) 00:05.0 CB80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CB80





iPXE (http://ipxe.org) 00:06.0 CC80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CC80





iPXE (http://ipxe.org) 00:07.0 CD80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CD80





iPXE (http://ipxe.org) 00:08.0 CE80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CE80





iPXE (http://ipxe.org) 00:09.0 CF80 PCI2.10 PnP PMM BFF913B0 BFEF13B0 CF80





iPXE (http://ipxe.org) 00:0A.0 D080 PCI2.10 PnP PMM BFF913B0 BFEF13B0 D080



Booting from Hard Disk...
Welcome to the PanOS Bootloader.


Hit any key to stop autoboot...
Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:

It works,
the issue above is wrongly created image of Palo for EVE
https://www.eve-ng.net/index.php/docume ... palo-alto/

EVE below is running on ESXi 6.7