Support and News Forum

Hello every one,

Kindly i need help to find a good IOU image can handel POSTURE REDIRECT for CISCO ISE .

Thanks in advance.

I believe it could be vIOS better vs IOL image
somethinl like L3 vIOS 15.XT series

Uldis (UD) wrote: ↑

Fri Jan 04, 2019 12:11 pm

I believe it could be vIOS better vs IOL image
somethinl like L3 vIOS 15.XT series

Hi UD,

Happy new year for you.

Would you please explain more to me , because as i know L3 vIOS 15.XT series is a router image, which is not helping in this case , i already tried vIOS L2 image: vios_l2-adventerprisek9-m.03.2017 but this one have a massive problem with dacl.

Many Thanks

dACL works best with this one
i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin

recently shared everywhere, just check in google

UD

Uldis (UD) wrote: ↑

Fri Jan 04, 2019 6:31 pm

dACL works best with this one
i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin

recently shared everywhere, just check in google

UD

Hello UD,
Thanks alot for your reply and for your time , you are right this one have no problem with dacl , but the URL POSTURE Redirect still not working ,as this image doesn't support IP HTTP Secure Server ,it only support IP HTTP Server.
any other suggestions..!!??

Best Regards

Use real device then

this one has ip http secure server, but no idea if it does anything else...

i86bi_linux_l2-advipservicesk9-ms.high_iron_20170202.bin

Uldis (UD) wrote: ↑

Sat Jan 05, 2019 9:01 am

Use real device then

this one has ip http secure server, but no idea if it does anything else...

i86bi_linux_l2-advipservicesk9-ms.high_iron_20170202.bin

Hello UD,

Thanks for your reply, i tried this image also, this image has dacl problem . i will buy a real switch as u suggested.

Thanks for your time.