Cisco Router interfaces shut down
Posted: Sun Apr 14, 2019 12:24 pm
Keep having this werid issue that I have only experienced on the Cisco Router image: vios-adventerprisek9-m.SPA.156-1.T
I have built a router that connects to my physical network where my TACACS server is hosted. all the interfaces keep adding the shutdown command in.. If I type no shut, save the config and reload. They will be shutdown again. At the time of starting the VM, I can see:
*Apr 14 12:22:13.394: %PA-3-PA_INIT_FAILED: Performance Agent failed to initialize (Missing Data License)
*Apr 14 12:22:16.597: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Apr 14 12:22:16.598: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Apr 14 12:22:16.599: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
*Apr 14 12:22:16.600: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to administratively down
*Apr 14 12:22:16.600: %LINK-5-CHANGED: Interface GigabitEthernet0/4, changed state to administratively down
*Apr 14 12:22:16.601: %LINK-5-CHANGED: Interface GigabitEthernet0/5, changed state to administratively down
*Apr 14 12:22:16.601: %LINK-5-CHANGED: Interface GigabitEthernet0/6, changed state to administratively down
*Apr 14 12:22:16.602: %LINK-5-CHANGED: Interface GigabitEthernet0/7, changed state to administratively down
*Apr 14 12:22:17.446: %CVAC-4-FILE_IGNORED: Configuration file flash0:/ios_config.txt is ignored : empty file
*Apr 14 12:22:17.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Apr 14 12:22:17.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Apr 14 12:22:17.716: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
*Apr 14 12:22:17.717: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to down
*Apr 14 12:22:17.717: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/4, changed state to down
*Apr 14 12:22:17.718: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/5, changed state to down
*Apr 14 12:22:17.718: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/6, changed state to down
*Apr 14 12:22:17.719: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down
I've used the L2 VIRL images loads of time and never had any problems, this is the first time I have used the VIRL router image, and its so annoying. Any one else experienced this?
I have built a router that connects to my physical network where my TACACS server is hosted. all the interfaces keep adding the shutdown command in.. If I type no shut, save the config and reload. They will be shutdown again. At the time of starting the VM, I can see:
*Apr 14 12:22:13.394: %PA-3-PA_INIT_FAILED: Performance Agent failed to initialize (Missing Data License)
*Apr 14 12:22:16.597: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Apr 14 12:22:16.598: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Apr 14 12:22:16.599: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
*Apr 14 12:22:16.600: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to administratively down
*Apr 14 12:22:16.600: %LINK-5-CHANGED: Interface GigabitEthernet0/4, changed state to administratively down
*Apr 14 12:22:16.601: %LINK-5-CHANGED: Interface GigabitEthernet0/5, changed state to administratively down
*Apr 14 12:22:16.601: %LINK-5-CHANGED: Interface GigabitEthernet0/6, changed state to administratively down
*Apr 14 12:22:16.602: %LINK-5-CHANGED: Interface GigabitEthernet0/7, changed state to administratively down
*Apr 14 12:22:17.446: %CVAC-4-FILE_IGNORED: Configuration file flash0:/ios_config.txt is ignored : empty file
*Apr 14 12:22:17.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Apr 14 12:22:17.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Apr 14 12:22:17.716: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
*Apr 14 12:22:17.717: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to down
*Apr 14 12:22:17.717: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/4, changed state to down
*Apr 14 12:22:17.718: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/5, changed state to down
*Apr 14 12:22:17.718: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/6, changed state to down
*Apr 14 12:22:17.719: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down
I've used the L2 VIRL images loads of time and never had any problems, this is the first time I have used the VIRL router image, and its so annoying. Any one else experienced this?