Support and News Forum

jchan wrote: ↑

Wed Aug 16, 2017 2:44 am

My OS image is : viosl2-adventerprisek9-m-15.2(20170321)

Tried applying "service-policy input/output xxx" on interface port or SVI, it is not working. No hit or match on show policy-map interface outputs.

I am just wonder that does Qos work in vIOS L2 image?

Switch#sh policy-map int
GigabitEthernet0/2

Service-policy input: PM_USAfx

Class-map: CM_DISTRICT_1 (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: access-group name ACL_DISTRICT_1
police:
rate 8000 bps, burst 1500 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps

Class-map: CM_DISTRICT_2 (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: access-group name ACL_DISTRICT_2
police:
rate 8000 bps, burst 1500 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps

Class-map: class-default (match-any)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: any
Switch#