Hello.
After exporting my labs, there is a Cisco ASAv configuration issue. In "Startup-configs", all configurations are displayed, but do not want to be poured onto the device. In this case, no errors are written. How to fix it?
Сonfiguration errors during export
Moderator: mike
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Сonfiguration errors during export
re watch our video, how to operate with intial configurations
https://www.eve-ng.net/documentation/ho ... figuations
after exported cfg need set node boot from export and mandatory is wipe node before start
https://www.eve-ng.net/documentation/ho ... figuations
after exported cfg need set node boot from export and mandatory is wipe node before start
-
- Posts: 2
- Joined: Thu Apr 11, 2019 6:58 am
Re: Сonfiguration errors during export
I do everything as shown in this video:
In it (new lab) erased all cfg, then click "set node's startup-cfg to exported" and check the operation of the devices.
Now made as you wrote - all the same ASA empty.
- saved config in NVRAM
- exported all config
In it (new lab) erased all cfg, then click "set node's startup-cfg to exported" and check the operation of the devices.
Now made as you wrote - all the same ASA empty.
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Сonfiguration errors during export
obvioualy ASA image issue then