Hi,
I am part of the Aruba switching TME team and I am working on the new Aruba CX Virtual Switch image template
In the template I was able to change the CPU, RAM, port number, and more. However, I was wondering if there is a way to
change the default QEMU version to 4.1.0.
Thank you in advance.
Best Regards,
Ruben Iglesias.-
Technical Marketing Engineering
Aruba Networks
A Hewlett Packard Enterprise Company
Image template parameters
Moderator: mike
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Image template parameters
Of mate, did you ever check EVE Cookbook, section 17.3??
https://www.eve-ng.net/index.php/docume ... -cookbook/
Uldis
https://www.eve-ng.net/index.php/docume ... -cookbook/
Uldis
-
- Posts: 5
- Joined: Fri Apr 10, 2020 4:14 pm
Re: Image template parameters
Hi Uldis,
1. Yes, I edited the template and I was able to change many parameters: CPUs, RAM, number of ports and machine type. However, I don't see how to change the QEMU version. According to our tests, 4.1.0 seems to be the best option, but the default is 2.4.0.
I also tried to follow your video on how to make changes to one node and use it to change the virtioa.qcow2... but it didn't change this particular parameter.
SO, is it possible to change the default?
2. About the machine type, do you have a recommendation for a virtual switch like the Aruba CX?
Thank you!
Regards, Ruben.-
1. Yes, I edited the template and I was able to change many parameters: CPUs, RAM, number of ports and machine type. However, I don't see how to change the QEMU version. According to our tests, 4.1.0 seems to be the best option, but the default is 2.4.0.
I also tried to follow your video on how to make changes to one node and use it to change the virtioa.qcow2... but it didn't change this particular parameter.
SO, is it possible to change the default?
2. About the machine type, do you have a recommendation for a virtual switch like the Aruba CX?
Thank you!
Regards, Ruben.-
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Image template parameters
No mate, if you would look at the cookook, then you would see which is default qemu for the node...
How to do yu think what is this value on the template??
and it is changeavle value
How to do yu think what is this value on the template??
and it is changeavle value
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: Fri Apr 10, 2020 4:14 pm
Re: Image template parameters
Good, thank you!