Hi,
I have image "vios_l2-adventerprisek9-m.03.2017.qcow2" for a switch, thinking it'd have at least 24 ports, but it's only actually got around 8 ports, making it an 8 port switch. On GNS3, you have IOL images, which can support more? What images would you recommend for well..more interfaces? Is there a way, we can "add modules" in EVE-NG too?
Other than that, Eve NG looks perfectly fine
L2 image only has a few interfaces?
Moderator: mike
-
- Posts: 4
- Joined: Thu Aug 06, 2020 11:57 am
Re: L2 image only has a few interfaces?
Ignore
I've noticed when deploying this, you can change the ethernet from 8 to 24
I've noticed when deploying this, you can change the ethernet from 8 to 24
-
- Posts: 4
- Joined: Thu Aug 06, 2020 11:57 am
Re: L2 image only has a few interfaces?
Ignore again. That functionally does nothing
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: L2 image only has a few interfaces?
vIOS L2 max supported are 16 interfaces !!
vIOS L3 max supported are 10 interfaces
IOL L2 max supported are 24 interfaces, 6x4port cards loaded.
vIOS L3 max supported are 10 interfaces
IOL L2 max supported are 24 interfaces, 6x4port cards loaded.
-
- Posts: 4
- Joined: Thu Aug 06, 2020 11:57 am
Re: L2 image only has a few interfaces?
Thanks. I've now configured the IOL image with 6 of the portsUldis (UD) wrote: ↑Thu Aug 06, 2020 2:22 pmvIOS L2 max supported are 16 interfaces !!
vIOS L3 max supported are 10 interfaces
IOL L2 max supported are 24 interfaces, 6x4port cards loaded.