Hi - tried the bare metal install from the downloaded .iso of community edition it's been very unsuccessful. I have no networking, nor nano on the server - making it very hard to make updates or installs.
Have I missed something with the install or is the guide/iso wrong?
Has anybody got a successful Bare metal install of the community edition?
Thanks
Working Bare Metal Community install guide
Moderator: mike
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Working Bare Metal Community install guide
Yes,
installing from ISO you must have internet on your EVE as well.
What is that HW specification of your bare?
What NIC?
installing from ISO you must have internet on your EVE as well.
What is that HW specification of your bare?
What NIC?
-
- Posts: 12
- Joined: Sun Jun 16, 2019 5:47 pm
Re: Working Bare Metal Community install guide
It's a Dell desktop with a Broadcom Gigabyte adaptor.
I am relatively new to Linux, so following through the guides with some dedication.
I tried to install Ubuntu Server and run through the installation - seems to get a little further until the installation of eve-ng
it failed with this
and it seems to have a connection to the eve-ng
I am relatively new to Linux, so following through the guides with some dedication.
I tried to install Ubuntu Server and run through the installation - seems to get a little further until the installation of eve-ng
it failed with this
Code: Select all
root@eve-ng:~# apt-get update
Hit:1 http://gb.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://gb.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Hit:3 http://www.eve-ng.net/repo xenial InRelease
Get:4 http://gb.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:6 https://esm.ubuntu.com/infra/ubuntu xenial-infra-security InRelease
Hit:7 https://esm.ubuntu.com/infra/ubuntu xenial-infra-updates InRelease
Fetched 325 kB in 0s (533 kB/s)
Reading package lists... Done
root@eve-ng:~# #DEBIAN_FRONTEND=noninteractive apt-get -y docker-engine
root@eve-ng:~# DEBIAN_FRONTEND=noninteractive apt-get -y install eve-ng
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package eve-ng
Code: Select all
root@eve-ng:~# nslookup eve-ng.net
Server: 192.168.1.1
Address: 192.168.1.1#53
Non-authoritative answer:
Name: eve-ng.net
Address: 51.89.118.57
root@eve-ng:~# ping 51.89.118.57
PING 51.89.118.57 (51.89.118.57) 56(84) bytes of data.
64 bytes from 51.89.118.57: icmp_seq=1 ttl=47 time=23.7 ms
64 bytes from 51.89.118.57: icmp_seq=2 ttl=47 time=57.8 ms
64 bytes from 51.89.118.57: icmp_seq=3 ttl=47 time=22.4 ms
^X64 bytes from 51.89.118.57: icmp_seq=4 ttl=47 time=23.4 ms
^C
--- 51.89.118.57 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 22.470/31.856/57.825/15.000 ms
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Working Bare Metal Community install guide
EVE Community does not support dockers.
And install Community you should follow EVE Community cookbook
Chapter 3.3
https://www.eve-ng.net/index.php/docume ... -cookbook/
And install Community you should follow EVE Community cookbook
Chapter 3.3
https://www.eve-ng.net/index.php/docume ... -cookbook/