ASA, Nexus9000, WAAS all doesn't work

[zdh45222zy]

Hello Sir,

I am a network engineer from China and very interested in EVE-NG after given a brief introduction from Cisco.

These days, I tried to download several type of Voas including IOU/IOL vWAAS, ASAv , NX9K. but only IOU/IOL is successful. others are failed.

Could you please analysis the problem below and give me some advice ?

Much appreciate your help

1 Problem description:
(1)I download the same version of voa files for ASA, Nexus9k, WAAS as the HowTo's
(2) do the same steps follow up with HowTo's
(3) Run EVE-NG web portal and add node (ASA, Nexus9K, WAAS).
(4) Telnet to IP with 327xx port number via SecureCRT
(5) but in the SecureCRT , no any response after raise the connecting to Nodes ( connection is green, but no any command response,it is blank)


2 Physical computer
Intel i5-4300U CPU, 1.9Ghz 2.5Ghz
Memory: 8G

3 VMware workstation version 8.0.3 build-703057
Vmware EVE server's virtual memory is 11520 reduced by system from 16 to 11.52G

[Uldis (UD)]

well,


and is your CPU set for Intel VT-X/EPT option ?
and starting from VM workst 9 -12 is supported

[zdh45222zy]

and is your CPU set for Intel VT-X/EPT option ?
Yes, i check my bios seting for HP 820 , I have enable the all virtualation setting in Bios.

and starting from VM workst 9 -12 is supported
I have another PC with VMware 11 , but it still has this problem.


Do you think if my laptop hasn't enough memory ?

thanks

[Uldis (UD)]

I think that settings are still not right

come in our skype help maybe online we can look what you have not done there

https://join.skype.com/hp6FIrOYpcuJ

[zdh45222zy]

Hi Sir,

My time zone is GMT+8 Singapore time zone.

Can I make an appointment with you when the time is suitable for you.

I will setup my Lab before the change

Can you share your mail address so that i sent the MML to you

Much appriecate your help.

[zdh45222zy]

Please see the screen from the issue node

[Uldis (UD)]

sir for correct image upload and preparation you have to follow our HowTo page !!!

http://www.eve-ng.net/index.php/documentation/howto-s

advice, get fresh nice asav 9.7.1 qcow image from cisco and follow our how to prep asav for eve

UD

[zdh45222zy]

Thank you all of your help.

Thank you very much eve engineer

thank you all friends to reply or looking this problem.

[zdh45222zy]

1 vmware 12
2 asav971-4.qcow2
3 follow up with Howto's . we must trust it and follow up it striclty
4 i have one issue when apt-get install libguestfs-tools
reason some of US sources are block so the installaion was failed
solution: change sources.list , choose others source list to try installation.

[venerzky]

My ASAv works fine using the VNC viewer. How will I configure the ASAv to use Putty or SecureCRT? Thanks.