Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Wed Aug 02, 2017 6:10 pm

I have set up a lab NX-OS Cisco NX-OS titanium-d1.7.3.0.D1.1.bin .

i have interconnected the switch .

i am booting the devices , one device is fine ,for second one i am not able to save or view show command ,its showing below error.

INIT: Id "sm" respawning too fast: disabled for 5 minutes

another issue : is lacp supported on NX-OS titanium-d1.7.3.0.D1.1.bin ?
i have checked show feature , its not displayed .
if am trying to enable lacp its getting below error

switch(config)# feature lacp
Error
switch(config)#

please help .

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by Uldis (UD) » Wed Aug 02, 2017 6:26 pm

licence grace perion need activate frst
and probably your PC has no source to run second switch...
Single Titanium node need 1xCPU and 4gb RAM !!!

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Thu Aug 03, 2017 7:53 am

ok , i will upgrade my pc ram .
how to get the licence ?.

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by Uldis (UD) » Fri Aug 04, 2017 7:48 am

Licence is inside of this node:)
just need activate it.

Sir please check cisco.com how to enale grace period on nexus:)

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Fri Aug 04, 2017 6:19 pm

Sir,

i have cisco account also ,but i cant find the license . can you how to install the license and were to download .

thanks in advance

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Fri Aug 04, 2017 6:20 pm

Sir,

i have cisco account also ,but i cant find the license . can you tell me how to install the license and were to download .

thanks in advance

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by Uldis (UD) » Fri Aug 04, 2017 8:13 pm

:) Do this

first add command and after with feature choose what you want to use, 120 days:

Code: Select all

switch(config)# license grace-period
switch(config)# feature ?
  bfd                    Bfd
  bgp                    Enable/Disable Border Gateway Protocol (BGP)
  bulkstat               Enable/Disable Bulkstat (An embedded management
                         application) 
  cable-management       Enable/Disable Cable Management Manager (CMM)
  cts                    Enable/Disable CTS
  dhcp                   Enable/Disable DHCP Manager
  dot1x                  Enable/Disable dot1x
......OMITTED.....
switch(config)# feature eigrp
LAN_ENTERPRISE_SERVICES_PKG license not installed. eigrp feature will be shutdow
n after grace period of approximately 119 day(s) 
switch(config)# 2017 Aug  4 20:12:29 switch %LICMGR-2-LOG_LIC_NO_LIC: No license(s) present for feature LAN_ENTERPRISE_SERVICES_PKG. Application(s) shut down in 119 days.

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Sat Aug 05, 2017 2:35 pm

sir,
still i am getting error , i have attached the error screen shot , can you please help .
You do not have the required permissions to view the files attached to this post.

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by Uldis (UD) » Sun Aug 06, 2017 9:01 am

All simple then, your image is simply corrupted. No idea where did you get it.
Such behavioure is on broken image
join our live support skype group, then maybe we can see what you doing there:)

UD

vinoth13.c
Posts: 20
Joined: Fri Jul 28, 2017 3:14 am

Re: Problem Cisco NX-OS titanium-d1.7.3.0.D1.1.bin

Post by vinoth13.c » Tue Aug 22, 2017 5:57 pm

Hi Sir,

the file contain is 204 MB . is that correct?

thanks

Post Reply